Kennedy® Supra-Rapid Clamping Industrial Keyless Drill Chucks

Fully hardened and ground working parts. The jaws are centre ground for alignment concentricity. Robustly designed for durability and wear resistance in the most arduous of industrial applications on stationary drilling machines. Unsuitable for reversing drills.

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Clad Bay Euro Shelving

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Suspended Cabinets

Cabinets fix directly into the bench framework, either left or right hand positions. In common with all accessories for this range, the cabinets can be fitted at a later date. All cabinets are 500mm wide x 550mm deep and centrally lockable.

Depth 600mm

1x 525mm cupboard

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Matlock™ Parts, Component and Tool Storage Bins

Matlock™ high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage. The versatile Matlock™ storage bin can be interlocked side by side, nested on top of each other, hung on steel louvred panel (supplied separately) or using riser rods (supplied separately) they can be stacked on top of each another, this functionality allows you to create the storage system to satisfy your specific requirement.

Matlock™ storage bins are available in seven sizes and a choice of four colours blue, green, red and yellow and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Matlock™ Plastic Storage Bin Size: No.5 Dimensions 425x280x260mm(LxWxH)

Archive Bays

Matlock™ QuickRack industrial racking and shelving is a flexible, simple and cost effective solution to your storage problems. Assembly of the shelving couldn't be simpler, simply slot and tap the frame work together as there are no fiddly nuts and bolts. Each shelving bay is supplied with 18mm thick shelves, extra shelves are available on request, allowing you to design shelving bays to suit your specific space/storage requirements. THIS IS A SHELF UNIT ONLY



Simple, strong and excellent value document storage bays offer easy record storage and retrieval. Assembles in minutes without nuts, bolts or rivets. Prices include boxes. Bays comprise of 4 uprights in choice of 3 colours, 3 shelf levels with 18mm FSC compliant chipboard supported by light grey channel and metal footplates. Assembly instructions included. Maximum shelf load 210kg.

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Magnetic Vice Jaws

Suitable for all steel and iron vices - engineers, fitters, machine. Quick and easy to fit and remove.

Profiled Aluminium

Kennedy® Morse Taper Tooling

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

Drill Sleeves