Jacobs Chucks

Jacobs Stainless Steel Chucks are suitable for special applications on either portable drills or stationary machine tools; they are mainly used in medical and chemical industries.

Features & Benefits
Resists chemical corrosion.
Reduces potential for hazardous sparking.
Minimizes risk of ferrous contamination in sterile environment.
Self-tightening feature of stainless steel keyless chucks automatically increases gripping force proportional to increased torque to prevent bit slippage.

Stainless Steel Chuck

Product Number 1BM 3/8??
Specification:
Mount: 3/8-24
Capacity: 0-6mm
Key: K1M
Weight: 141.7g

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Clad Bay Euro Shelving

Framework Benches

Simple and economic solutions to the need of production assembly, maintenance and despatch personnel.
18mm FSC compliant chipboard working surface (210kg UDL). Shelves on workstations carry 150kg UDL.
Robust uprights and light grey beam finish. Kits supplied with metal feet and full assembly instructions.

Vertical Industrial Toggle Clamps

Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

Fixed Spindle & Solid Bar Type

Straight Base

Precision Brand Stainless Steel Shims

Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.

Tensile strength: 185,000psi min.

Stainless Steel Shims - Inch Sizes

Kennedy® Morse Taper Tooling

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

Extension Sockets

Matlock™ Parts, Component and Tool Storage Bins

Matlock™ high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage. The versatile Matlock™ storage bin can be interlocked side by side, nested on top of each other, hung on steel louvred panel (supplied separately) or using riser rods (supplied separately) they can be stacked on top of each another, this functionality allows you to create the storage system to satisfy your specific requirement.

Matlock™ storage bins are available in seven sizes and a choice of four colours blue, green, red and yellow and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Label Holders for Matlock? Plastic Storage Bins

These plastic label holders fasten over the front of the Matlock™ storage bins so that an identification label can be displayed for the contents of the storage bin.

Grinding Machine Guards

The three types of guard all comply with the Abrasive Wheels Regulations, the Protection of Eye Regulations 1974 and have been tested to BS 2092 Grade 1. The visor is manufactured from polycarbonate. The frames for the 130003 and 130005 guards are moulded reinforced nylon and the 130007 are manufactured from aluminium.

Lathe Chuck Jaws

For self-centring lathe chucks (IND-475) - Indexa 3200 and 3500. Chuck jaws supplied in sets of 3.

Hard Jaws

Inside

Brass Shim

Precision Brand’s Brass Shim Stock is a half hard, cold rolled, CDA 260 alloy.
Rockwell hardness: 30T 56 - 68.
Meets SAE-CA-260, CDA 260, ASTM B-19 & B-36.
Tensile strength: 57 - 67,000psi.
Elongation: 18 to 42% in 2”.
Size: 6” x 100”.