Portable Welding Smoke Eliminators

The portable filter solution for welding fumes captures the hazardous fumes before they reach the welders breathing zone. Pre-separator, particle filter and fan, all packed into one handy case of only 16kg. Large capacity filter which captures 99.7% of the welding fume particles. The FE 841 features automatic start/stop action and 'full filter' indicator.

Fume Eliminator 840/841

FE 840/841 is the ideal solution for welding fume extraction where traditional evacuation is not possible. The units are very easy to bring along for service jobs in the field, as well as for welding inside containers or metal tubes where the constraint on the welder normally is high.
FE 840 has a manual on/off switch, the FE 841 has an automatic on/off function sensing when the welding begins. After the welding is completed, the unit keeps running for 5 - 25 seconds. This time delay can be
adjusted to suit the actual situation.
The FE 841 is also equipped with a 'full filter' indicator.
Voltage 230V 50/60Hz. Power 1000W.
Airflow (with 2.5m hose) 150m3/h.
Maximum vacuum: 22kPa.
Filtration efficiency: 99.7%. Sound level: 73dB(A).
Dimensions (L x W x H): 830 x 230 x 410mm.

Spares for Speedglas 9100 Auto Welding Helmets

Outer protection plate

Kennedy Triple Flint Type Spark Lighter (1284)

For easy and rapid single handed ignition of welding and cutting torches. When one flint wears, turn the triangular head to use the next flint.

Auto' Ignition Torches

Powerful instantly flare safe gas torch for the professional plumber, with push button auto ignition and advanced gas control system for which gives consistent performance while moulded neck stand allows horizontal burning. Gas cartridges fitted with standard type threaded self-sealing safety valves.
Complete with 2350 cartridge and stabilising base.

AP2010 Auto Power Torch

Murex Saffire MK4 Gas Economiser

The Murex MK4 Gas Economiser is a device that economises the use of gas used in welding operations up to a nozzle size of 25. During nonwelding periods the blowpipe can be hung safely on the hooked lever, which operates the gas shut-off valves in the economiser.

Binzel Mig Torch Accessories

Also compatible with Parweld torches.

Conical Nozzles

Murex All Positional Welding Electrodes

One of the most versatile electrodes available, suitable for Vertical, Overhead and Downhand welding. Available in 2.5, 3.2, 4.0, 5.0 and 6mm.

Vodex 6013

High quality rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
N.B. suitable for AC (50V minimum open circuit) and DC plus/minus.

Electrodes for Stainless Steels

For welding 316 and 316L stainless steels. Available in 2.5 and 3.2mm.

Nicrex E312 Stainless Steel Electrodes

Nicrex E312 electrodes from Murex are highly alloyed stainless steel electrodes of unusual versatility. It deposits a ferritic/austenitic duplex weld metal with about 40% ferrite content.
Applications: the welding of dissimilar steel combinations such as mild or low alloy steel to stainless steel, and the welding of spring steels, nickel steels and other hardenable steels.

Heavy Duty Swaged Welding Nozzles

For use with heavy duty shank.

Kennedy Tig Torch Accessories

Also compatible with Parweld and Binzel torches.

Standard Collets

10N_ _ To suit WP17/18/26 torches.