Electrodes for Mild Steels

Available in 2.6 x 300mm, 3.2mm x 350mm and 4mm x 400mm.

E7018 (?Low Hydrogen?)

Basic coated, all positional rods.
Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensate for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking.
N.B. Suitable for AC (70V minimum open circuit) and DC. Optimum rooting operability is obtained using DC-.
Recommended Amperages;
Size(mm) 2.5 3.2 4.0.
Min. 70A 95A 130A.
Max. 100A 125A 170A.

Stainless Steel Mig Wire

Ideal for welding stainless steels. It has increased silicon content for an improved weld that produces a smoother more consistent bead making it ideal for use were appearance is important. For use on stainless steel structures. Supplied on a precision layer wound reel for positive uninterupted feeding. Weight: 15kg.

ANM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

PNM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

RED insulated liner FOR WIRES
with retainer 1.0/1.2mm

TO SUIT: MB15 MB25 MB36

Kennedy Mig Torch Accessories

Conical and Tapered

Gas Nozzles

PNM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

Oxygen/Acetylene Welding Hose Sets

Oxy Acetylene Oxygen (blue) and acetylene (red). Kink/ crush resistant. 6 and 8mm (general use). 10mm (heavy duty/flame cutting). Supplied fully fitted complete with hose check
valves.

Cup Type (1282)

For easy and rapid single handed ignition of welding and cutting torches.

Kennedy Welding Accessories

Kennedy PVC welding curtains comply with EN1598 to block out welding light. The curtains have snap-fasteners on both sides to allow several to be joined together to create the desired width.

Supplied with reinforced holes on the upper edge and steel suspension rings.

PVC Welding Curtains

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C.

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Supplied with steel curtain rings.

Available in a range of sizes and colours.