Oxygen/Acetylene Welding Hose Sets

Oxy Acetylene Oxygen (blue) and acetylene (red). Kink/ crush resistant. 6 and 8mm (general use). 10mm (heavy duty/flame cutting). Supplied fully fitted complete with hose check
valves.

RED insulated liner FOR WIRES
with retainer 1.0/1.2mm

TO SUIT: MB15 MB25 MB36

Kennedy Mig Torch Accessories

Compatible with Parweld and Binzel Torches.

Contact Tips & Tip Adaptors

Kennedy Welding Accessories

Kennedy PVC welding curtains comply with EN1598 to block out welding light. The curtains have snap-fasteners on both sides to allow several to be joined together to create the desired width.

Supplied with reinforced holes on the upper edge and steel suspension rings.

PVC Welding Curtains

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C.

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Supplied with steel curtain rings.

Available in a range of sizes and colours.

Spare flints (1 head) for Kennedy Triple Flint Type Spark Lighter (1284)

When one flint wears, turn the triangular head to use the next flint.

Oxygen Regulators

Designed with 2 gauges to indicate cylinder
contents and outlet pressure.

4.0 Bar Oxygen Regulator
Full 300 bar capacity.
10.0 Bar Oxygen Regulator
Full 300 bar capacity.

Bottom entry
design, which
is suited for
top outlet
cylinder valves.
Fitted with 1/4?
parallel threaded
gauges,
standard
3/8? BSP
outlet and
5/8? BSP inlet
connections.

Kennedy Welding Accessories

Kennedy PVC welding curtains comply with EN1598 to block out welding light. The curtains have snap-fasteners on both sides to allow several to be joined together to create the desired width.

Supplied with reinforced holes on the upper edge and steel suspension rings.

PVC Welding Curtains

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C.

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Supplied with steel curtain rings.

Available in a range of sizes and colours.

Kennedy Mig Torch Accessories

Compatible with Parweld and Binzel Torches.

Contact Tips & Tip Adaptors

Kennedy Mig Torch Accessories

Compatible with Parweld and Binzel Torches.

Contact Tips & Tip Adaptors

Argon & Acetylene Regulators
.

Designed with 2 gauges to indicate cylinder contents and outlet pressure.
Argon regulator outlet gauge is calibrated for
flow 0 - 35lpm. Acetylene regulator has a
calibrated flow rate
of 0 - 1.5 bar
with a full
250 bar
capacity.

Features:
Flow rates up to
80m3/h
(2824 ft3/h)
300 bar
capability.
Features
2 gauges
displaying
cylinder contents
and pressure.

Bottom entry design suited
for top outlet cylinder valves.
Fitted with 1/4? parallel threaded gauges.
Fitted with standard 3/8? BSP outlet.
Fitted with 5/8? BSP inlet connections.