Oxford 3 Point Bore Micrometers

Designed to self-centre, for accurate measuring of bores.
Extension rods for measuring 170mm deep on 11 - 20mm and 220mm deep on 20 - 40mm.
Satin finish, fitted with knurled ratchet stop.

Azlon Classic Design Graduated PP Beakers

Popular, classic Azlon beakers designed to BS5404: Part 1 1976. Good chemical resistance. Can withstand temperatures up to 135C. Graduations and an indication of material and maximum heat resistance are clearly printed using indelible solvent resistant ink.

Available in capacities: 25ml, 50ml, 100ml, 250ml, 400ml and 1000ml, as singles or in packs of 10 (N.B. 1000ml version, single or pack of 5 only).

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

Metric Fine - Class Tolerance 6G

57.4mm Diameter Face

Conventional size, easy to read indicator for general applications.

Series 2

Jewelled Type

Kennedy® Digital Protractor

This digital protractor has a range of 360° split into 4 x 90° quadrants. It is simple to calibrate and the intelligent display changes orientation at 90° and 270° to remain readable. It has a 'V' groove on the top and bottom for easy placement on acute angled or cylindrical objects. 3V lithium battery gives up to 2000 hours use. Complete with a leatherette pouch that has a belt loop.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

UNF - Class 2B Tolerance

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

BSF - Medium Class Tolerance

05. 'T' Series

These indicators have a switch lever for reversing the direction of movement. Lever mounted in ball bearings. Fitted with 4mm/1/4" diameter top spigot and holder body side clamp which accepts rods up to 6.5mm/0.256". Indicator body machined with dovetail to suit attachments.

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Diamond Indentor

Twin Thermometer & Humidity Dials

For the measurement of Humidity up to 100%. Dials fitted into a plastic moulded casing. Lightweight and can be easily fixed to most surfaces. Adhesive pad (supplied).



Diameter 55mm. Range: -30C to 60C. 0F to 100F