Oxford Height Gauges

Designed for accurate marking out and taking precise measurements.
Measuring head positioned on sturdy twin columns providing highly repeatable height measurements and stability.
Easy reading with dual directional negative and positive reading mechanical digital counters.
Rotating dial face.
Independently set the counters, to zero at any position.
Large feed wheel for rapid and precise adjustment.
Tungsten carbide tipped scriber for accurate marking out.
Manufactured from durable stainless steel.

Mechanical Stroke Counter

Four digit (0-9999) metal body mechanical counters of sturdy chrome plated steel construction. With push button actuator and reset button.

Chrome Hand Tally

Comfortably fits in the palm of your hand, with finger ring and audible click on each count. Recommended for applications where operator must be mobile such as counting circulation, checking meeting attendance, inventory, etc.

Oxford Precision™ External Micrometers

With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25-50mm/1-2" and over supplied with setting standard. All supplied in a high quality fitted metal case. Manufactured to BS 870.

Metric

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Magnifying Glass With Clamp

Portable clip magnifier with flexible hose, clips easily to benches or tables. 89mm diameter lens. 2X magnification. Chrome plated brass frame. 180mm flexible hose length permits viewing at any angle. Black powder coated clamp provides stability and convenience. Portable and easy to clip onto a bench or table. Suitable for reading, sewing, quality control etc. Clamp capacity 55mm.

Oxford? Precision Engineers' Hand Tools

Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.

100mm (4") Engineer's Steel Square

Knife Edge Vernier Calipers

Give 4 types of reading, internal, external, depth and step. Dual reading scale (metric and inch) with 14 bevelled vernier scale for reduced parallax reading error, fine adjustment assembly and knurled locking nut. Manufactured from hardened stainless steel for rigidity with satin finish. Conform to DIN 862. For quick accurate setting of all three axes (X, Y, Z) by analogue differential indicator. Suitable for all machine tools with CNC, NC, DRO and also for EDM/spark erosion tools. Universal - one tool measures length, height, diameter and centre. No calculations and no 'trial and error' involved. Increses production and efficiency, reduces job time and operator requirement. Pre-adjusted to a concentricity of 0.01mm maximum.
Indicator diameter: 50mm.
Clamping shank diameter: 20mm.



For taking 4 types of measurement, internal, external, depth and step. Dual reading scale (metric and inch) Universal - one tool measures length, height, diameter and centre. No calculations and no ?trial and error? involved. Pre-adjusted to a concentricity of 0.01mm maximum. Indicator diameter: 50mm. Clamping shank diameter: 20mm.

Oxford Precision? Angle Plates

Manufactured from close grained cast iron. BS : 5535 Grade B.

Webbed End

Webbed slotted angle plates can be used for rapid mounting fixtures for machine set-up, layout, or inspection.
They are heavily ribbed for strength and rigidity.
Sides and ends are machine finished.

Oxford? Precision Digital Depth Gauge 0-150mm/0-6inches

Easy handling with mm/inch measurement, large digital display and a quick response speed. External readings with zero set at any point fitted with a thumb wheel for greater accuracy.

Specifications:
Resolution: 0.01mm/0.0005 inch.
Measuring Speed: 1.5mm/sec.
Working Conditions:
Temperature: 0C - 40C.
Relative Humidity: 80%.
Storage Temperature: -10C - 60C.
Accuracy: -0.02mm/0.001 inch.
Functions: mm-inch conversion/Zero set.
Power: One silver oxide button battery SR44, 1.55v.
Battery: SR 44 1pc.
Battery life: Approximately 2 years normal use. Approximately 1 year continuous use.
Weight: 196g.

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.

28 Piece Set

Contents: fourteen pairs of the following sizes:
14 x 10 x 150mm, 16 x 10 x 150mm, 18 x 10 x 150mm,
20 x 10 x 150mm, 22 x 10 x 150mm, 24 x 10 x 150mm,
26 x 10 x 150mm, 28 x 10 x 150mm, 30 x 10 x 150mm,
32 x 10 x 150mm, 35 x 10 x 150mm, 40 x 10 x 150mm,
45 x 10 x 150mm, 50 x 10 x 150mm.
Supplied in wooden storage box.