Oxford Precision™ Interchangeable Anvil Micrometer

Carbide tipped spindle faces. Hardened and ground anvils. Supplied in metal case with adjusting spanner. 4 anvils and 3 setting standards. Accuracy: plus/minus (4 plus L/75)mm. Measuring Faces Flatness: plus/minus 0.6mm. Parallelism: plus/minus (2 plus L/100)mm.

Multi Anvil Micrometer Set

An external micrometer with 7 pairs of interchangeable anvils. For measuring grooves, threads, bearings, tube & sheet. Anvils Included: 12mm disc, 5.5mm blade, 60 cone & blade, 6.5mm radius, 6.5 & 2mm flat.

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

Oxford? Precision 3 Point Internal Micrometer Sets

Designed to self-centre, for accurate measuring of bores. Extension rods for measuring 170mm deep on 11-20mm and 220mm deep on 20-40mm. Satin finish, fitted with knurled ratchet stop.



Contents: Micrometers: 20 - 25mm, 25 - 30mm, 30 - 35mm, 35 - 40mm. Calibration Ring: 25 & 35mm. Slotted Screwdriver. spanners x 2.

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Knife Edge Vernier Calipers

Give 4 types of reading, internal, external, depth and step. Dual reading scale (metric and inch) with 14 bevelled vernier scale for reduced parallax reading error, fine adjustment assembly and knurled locking nut. Manufactured from hardened stainless steel for rigidity with satin finish. Conform to DIN 862. For quick accurate setting of all three axes (X, Y, Z) by analogue differential indicator. Suitable for all machine tools with CNC, NC, DRO and also for EDM/spark erosion tools. Universal - one tool measures length, height, diameter and centre. No calculations and no 'trial and error' involved. Increses production and efficiency, reduces job time and operator requirement. Pre-adjusted to a concentricity of 0.01mm maximum.
Indicator diameter: 50mm.
Clamping shank diameter: 20mm.



For taking 4 types of measurement, internal, external, depth and step. Dual reading scale (metric and inch) Universal - one tool measures length, height, diameter and centre. No calculations and no ?trial and error? involved. Pre-adjusted to a concentricity of 0.01mm maximum. Indicator diameter: 50mm. Clamping shank diameter: 20mm.

Oxford Precision? Angle Plates

Manufactured from close grained cast iron. BS : 5535 Grade B.

Webbed End

Webbed slotted angle plates can be used for rapid mounting fixtures for machine set-up, layout, or inspection.
They are heavily ribbed for strength and rigidity.
Sides and ends are machine finished.

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

30mm Folding Pocket Magnifier with Scale

The original "Linen tester", although deriving its name from the textile industry it is also suitable for inspecting paper, photographs, printed documents etc.

FM30

30mm diameter glass lens. 6X magnification. 38mm (1 1/2") working distance. 25mm (1") square field. Metric & inch graduations 1mm & 1/8" divisions. Self standing to free your hands. Folds flat when not in use. Black powder coated body. Complete with plastic wallet.

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Diamond Indentor