Digimatic Tube Micrometer

Series 395 Digimatic Output 1 Spherical Face Model

395-351
Designed to measure wall thickness of various types of tubing etc.

Features:
Two spherical face and vertical pin type models also available.
Large LCD display.
IP65 rating.
Inch/metric conversion.
Zero setting.
Origin setting.
Data hold.
Data output.
Auto power off.
Tungsten carbide tipped measuring faces.
Spindle lock.

Range: 0 - 25mm/0 - 1?.
Accuracy: 2m .
Resolution: 0.001mm/0.00005?.

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Clock Only

Pocket Type - 32mm Diameter Face

9.5mm body for narrow lands between shoulders or in a bore. With jewelled bearings and precision miniature pivot bearings for almost friction-free movement of the contact point. Contact point is reversible by lever allowing measurement of the top or bottom surface of any workpiece. Bezel and dial face are fully adjustable.

Series 513

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Dial Calipers

Easy read dial suitable for use where a scale would be difficult to read. Satin chrome finish. Incorporates quadri feature.

Series 505

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

57.4mm Diameter Face

Conventional size, easy to read indicator for most general applications.



Graduation: 0.01mm
Travel: 5mm
Reading: 0-100

MDC Light Digimatic External Micrometers

Large LCD display. Imperial/Metric conversion. Lightweight construction. Easy single handed operation. Tungsten carbide tipped measuring faces. Accuracy: plus/minus 2mm.

293 series

Resolution: 0.001mm/0.00005"