Dial Indicators - 41mm Diameter Face

Jewelled Type with Limit hands and Rev. Counter

Series 1

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Digimatic Depth Gauges

Designed for measuring depth of hole, slots and recesses. Can be fitted with an extension base to extend its span. Base size 100mm. Functions: Inch/metric conversion. zero at any point. SPC data output. Power supply: Battery 1 off SR44 (PAN-904-5020K). Resolution: 0.0005"/0.01mm

Series 571 "ABSOLUTE"

Mitutoyo Universal Bevel Protractor

Series 187
High-precision angle gauge for accurate measurement of machines, moulds and jigs.
For use as a reference for assembling and machining.
Minimum reading: 5min.

Series 187

Type: 150mm/6" Rule

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output. Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882) - supplied. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3 mu m. L equals maximum measuring length. Resolution: 0.001mm/0.00001".

293 series

Mitutoyo Interchangeable Rod Depth Micrometers

The interchangeable rod depth micrometer is available as standard mechanical, mechanical digital and electronic digimatic (see separate digimatic entry). All models have hardened tool steel bases. Measuring rods are ground and micro-lapped on the faces. The sleeve and thimble are satin-chrome finished. Rod diameters are .157" (4mm) and are adjustable in either direction for calibration and wear compensation. Accuracy: Rod Diameter: 4mm. Measuring length per rod: 1" (25mm). Instrument Error: /-3mm. Flatness of reference face (bottom face of base)1.3mm for 60mm/2.5"base. 2mm for 100mm/4"base.

129 Series

Digimatic Absolute Calipers

The absolute zero feature enables an (ABS) 'origin point' to be set anywhere within the measuring range. When this point is established, the distance from this position will always be displayed, the intelligent memory retains the 'origin point' even when powered off. SPC output and inch metric conversion. Error-free operation. Infinite response speed. Large LCD display. Incremental feature. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Clock Only