Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Hub Micrometers - Enamelled Frame

Tungsten carbide tipped measuring faces. Clear graduations on satin chrome finish.
Accuracy:
Parallelism: (2+L/100)mm.
Flatness: 0.6mm.
Instrument Error: 0-75mm ±2µm, 75-100mm ±3µm.

L = maximum measuring length.

Series 147

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Data Processors - Type DP-1VR

A powerful inexpensive tool for SPC systems. Functions include: Calculations for statistical analysis and x-R control charts, as well as the generation of histograms and displacement charts. Measured data and GO//-NG judgements can be output via the RS232C port as well as printout. AC adaptor or NiCad batteries can be used as a power source. GO/NG judgement by green/red LED for quick tolerance checking.

Mechanical Tube Micrometers - Enamelled Frame

For measuring wall thickness, collars, tubing etc. checking dimensions from inside holes to outside edges. Measuring faces are carbide tipped, anvil and spindle are hardened, precision ground and micro-lap finished. Glare-free satin chrome sleeve and thimble, ratchet stop and positive locking clamp. Instrument Error: /-3mm.

Series 115

One Spherical Face Type

Digimatic Indicators - Type IDU

A low cost model that provides a simple Digital electronic indicator for workshop use as well as OEM applications. A compact design incorporating sealed control switches to provide maximum protection from oil, dirt and dust. Zero setting and data output. Inch/metric conversion and error indicator for spindle overspeed, direction change.

Series 575

Maximum response speed: 1600mm/second. Power supply: Battery 1 0ff SR44 (PAN-904-5020K). Resolution: .0005"/0.01mm

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Parallel Type - Sets

57.4mm Diameter Face

With Limit Hands and Rev. Counter

Series 2

Mitutoyo Interchangeable Rod Depth Micrometers

The interchangeable rod depth micrometer is available as standard mechanical, mechanical digital and electronic digimatic (see separate digimatic entry). All models have hardened tool steel bases. Measuring rods are ground and micro-lapped on the faces. The sleeve and thimble are satin-chrome finished. Rod diameters are .157" (4mm) and are adjustable in either direction for calibration and wear compensation. Accuracy: Rod Diameter: 4mm. Measuring length per rod: 1" (25mm). Instrument Error: /-3mm. Flatness of reference face (bottom face of base)1.3mm for 60mm/2.5"base. 2mm for 100mm/4"base.

129 Series

Digimatic Absolute Calipers

The absolute zero feature enables an (ABS) 'origin point' to be set anywhere within the measuring range. When this point is established, the distance from this position will always be displayed, the intelligent memory retains the 'origin point' even when powered off. SPC output and inch metric conversion. Error-free operation. Infinite response speed. Large LCD display. Incremental feature. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"