Mechanical Digital Micrometers

With drop forged steel frame, micro-lapped Tungsten Carbide tipped measuring faces and constant force ratchet. Accuracy: 0-75mm /- 2 mu m, 75-150mm /- 3 mu m. Flatness: 0.6 mu m for up to 300mm. Parallelism: (2L/100) mu m (fraction rounded down). Counter to 0.01mm (.001"). Vernier scale graduated to 0.001mm (.0001").
L maximum measuring length

Series 193

Imperial

Dial Calipers

Easy read dial suitable for use where a scale would be difficult to read. Satin chrome finish. Incorporates quadri feature.

Series 505

Digimatic Output Type Height Gauge

Two measuring modes, ABS (absolute) and INC (incremental), for increased inspection efficiency. Rigid construction ensures repeatable measurements. Six digit lcd display and a minus sign. Provided with data output port for SPC. Preset and zero setting (abs/inc), preset value memory (abs), data Hold, Coarse/fine feed switching, error alarm and low battery alarm. Power supply: Battery 1 off CR2032 supplied.

192-672-10 Height Gauge

Mitutoyo Vee Blocks & Clamps

Designed as a fixture for checking precision made parts. Supplied as a pair with clamps.

181 Series

Blade Micrometers - Satin Chrome Finished Frame

For the measurement of narrow grooves in forming tools, shaft diameters, keyways, splines, etc. The spindle is non-rotating, the anvils hardened and precision lapped. Made of forged steel the frame is fitted with heat plates. The sleeve and thimble are satin finished. Blade thickness: 0.030" (0.75mm). Measuring Depth: 0.25" (6.5mm). Parallelism: 0.00012"/3mm up to 2"/50mm. (3L/100)mm, (0.000120.00004L/4)" for models over 2"/50mm. Graduation: 0.0001" (0.01mm). Blade dimensions: a: 0.256" (6.5mm), b: 0.236" (6mm), c: 0.030" (0.75mm). Accuracy: /-3mm for up to 75mm, /-4mm for 75-100mm

122 Series

Accuracy:
3mm for up to 75mm.
4mm for 75 - 100mm.

Micrometer Heads

Spindle Diameter: 6.35mm - Tungsten Carbide Tipped. Spindle Housing Diameter: 10mm. Spindle Pitch: 1mm/.025mm. Main Body Diameter: 18mm. Overall length: 109mm. Accuracy (full scale): Metric: /-2 mu m Imperial: /-0.0001"

Series 150

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Digimatic Depth Gauges

Designed for measuring depth of hole, slots and recesses. Can be fitted with an extension base to extend its span. Base size 100mm. Functions: Inch/metric conversion. zero at any point. SPC data output. Power supply: Battery 1 off SR44 (PAN-904-5020K). Resolution: 0.0005"/0.01mm

Series 571 "ABSOLUTE"

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble