Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Combitest Type - Sets

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Magnetic Bases

Standard magnetic stand with cross arm.
On/Off lever to release magnet.

Suitable for stem diameter 3/8", 4.5 & 8mm.

Column: 12mm dia. x 176mm.
Crossbar: 10mm dia. x 165mm

Digital gauge not included.

Magnetic Stand Series 7

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Series 2

Conventional size, easy to read indicator for most general applications.



Graduation: 0.01mm
Travel: 10mm
Reading: 0-100
Accuracy: /-15 mu m
Measuring force: 1.4(N)
Test /- &956;

Hub Micrometers - Enamelled Frame

Tungsten carbide tipped measuring faces. Clear graduations on satin chrome finish.
Accuracy:
Parallelism: (2+L/100)mm.
Flatness: 0.6mm.
Instrument Error: 0-75mm ±2µm, 75-100mm ±3µm.

L = maximum measuring length.

Series 147

Disc Micrometers - Enamelled Frame

For measuring a displacement over a given number of gear teeth, closely spaced sections, ribs, keys and fins etc. Measurable gear pitch: 0.5-6 module. Graduation: 0.01mm (.001"). Accuracy: Parallelism: 0-50mm 4 mu m, 50-100mm (4L/50) mu m. Flatness: 1 mu m. Instrument Error: 0-50mm /-4 mu m, 50-100mm /-6 mu m. L maximum measuring length

123 Series

Mitutoyo Engineers' 200mm Levels

Incorporates zero-point adjusting feature and sub-level tube indicating error or main level tube to within 0.2 graduation. V-slot on base. Indicating error to one graduation. 2 models available with sensitivities ranging of 0.1mm/1m 0.02mm/1m.

Series 960

57.4mm Diameter Face

With Limit Hands and Rev. Counter

Series 2

Mitutoyo Interchangeable Rod Depth Micrometers

The interchangeable rod depth micrometer is available as standard mechanical, mechanical digital and electronic digimatic (see separate digimatic entry). All models have hardened tool steel bases. Measuring rods are ground and micro-lapped on the faces. The sleeve and thimble are satin-chrome finished. Rod diameters are .157" (4mm) and are adjustable in either direction for calibration and wear compensation. Accuracy: Rod Diameter: 4mm. Measuring length per rod: 1" (25mm). Instrument Error: /-3mm. Flatness of reference face (bottom face of base)1.3mm for 60mm/2.5"base. 2mm for 100mm/4"base.

129 Series