Dial Calipers

Easy read dial suitable for use where a scale would be difficult to read. Satin chrome finish. Incorporates quadri feature.

Series 505

Digital Indicators

Series 543 - Type IDC
Displays spindle movement digitally by means of a linear encoder.
Dial rotates through 330 for easy reading.
Inch/metric conversion.
Self-contained power supply.
Pre-set and zero-setting (ABS/INC).
Data output and direction changeover facilities.

Range: 0 - 12.7mm/0 - 0.5".
Accuracy: 0.003mm /0.00012".
Resolution: 0.001mm/0.00005".

Series 543 - Type IDC

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Dial Indicators - 41mm Diameter Face

Jewelled Type with Limit hands and Rev. Counter

Series 1

Digimatic Output Type Height Gauge

Two measuring modes, ABS (absolute) and INC (incremental), for increased inspection efficiency. Rigid construction ensures repeatable measurements. Six digit lcd display and a minus sign. Provided with data output port for SPC. Preset and zero setting (abs/inc), preset value memory (abs), data Hold, Coarse/fine feed switching, error alarm and low battery alarm. Power supply: Battery 1 off CR2032 supplied.

192-672-10 Height Gauge

Disc Micrometers - Enamelled Frame

For measuring a displacement over a given number of gear teeth, closely spaced sections, ribs, keys and fins etc. Measurable gear pitch: 0.5-6 module. Graduation: 0.01mm (.001"). Accuracy: Parallelism: 0-50mm 4 mu m, 50-100mm (4L/50) mu m. Flatness: 1 mu m. Instrument Error: 0-50mm /-4 mu m, 50-100mm /-6 mu m. L maximum measuring length

123 Series

57.4mm Diameter Face

Water Proof Limit Hands Type (2124F&2046F-60: Jewelled)

Series 2

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Clock Only