Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Micrometer Head - Spherical Spindle Type

Ratchet performs uniform and consistant force
Clear graduations on satin chrome finish
Range: 25mm, Graduation: 0.01mm, Weight 90g, Accuracy: /- 2 mu m

Series 150

57.4mm Diameter Face

Conventional size, easy to read indicator for general applications.

Series 2

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

Blade Micrometers - Satin Chrome Finished Frame

For the measurement of narrow grooves in forming tools, shaft diameters, keyways, splines, etc. The spindle is non-rotating, the anvils hardened and precision lapped. Made of forged steel the frame is fitted with heat plates. The sleeve and thimble are satin finished. Blade thickness: 0.030" (0.75mm). Measuring Depth: 0.25" (6.5mm). Parallelism: 0.00012"/3mm up to 2"/50mm. (3L/100)mm, (0.000120.00004L/4)" for models over 2"/50mm. Graduation: 0.0001" (0.01mm). Blade dimensions: a: 0.256" (6.5mm), b: 0.236" (6mm), c: 0.030" (0.75mm). Accuracy: /-3mm for up to 75mm, /-4mm for 75-100mm

122 Series

Accuracy:
3mm for up to 75mm.
4mm for 75 - 100mm.

External Micrometers with Heat Shield

Tapered (on anvil side) for hard to reach places. Supplied without measuring standards. Tungsten Carbide tipped anvils. Accuracy: Flatness: 0.6 mu m for 0.01mm (0.001") graduation, 0.3 mu m for 0.001mm (0.0001") graduation. Parallelism: 1 mu m for 0-25mm (0-1") Models, 2 mu m for 25-50mm (1-2") Models. Instrument Error: /-2 mu m.

102 Series

Dial Indicators - 1 1/2" Diameter Face

With Rev. Counter

Series 1

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Combitest Type - Sets