External Micrometers with Heat Shield

Tapered (on anvil side) for hard to reach places. Supplied without measuring standards. Tungsten Carbide tipped anvils. Accuracy: Flatness: 0.6 mu m for 0.01mm (0.001") graduation, 0.3 mu m for 0.001mm (0.0001") graduation. Parallelism: 1 mu m for 0-25mm (0-1") Models, 2 mu m for 25-50mm (1-2") Models. Instrument Error: /-2 mu m.

102 Series

300mm Vernier Depth Gauge

Series 527
Vernier depth gauges with fine adjustment feature. Base and measuring faces are made of stainless steel which has been hardened and microlapped.

Range: 0 - 150mm, 0 - 300mm.
Resolution: 0.02mm.



150mm vernier depth gauge with fine adjustment feature. Base and measuring faces are made of stainless steel which has been hardened and microlapped.
527-103: Range: 0-300mm. Resolution: 0.02mm.

Heavy Duty Vernier Caliper

Thumb wheel and locknut with fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 160

Metric & Imperial Reading Graduation: 0.02mm/0.001"

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Magnetic Bases

Flexible magnetic stand with precision smooth segments linked by a steel cable. Locked in position by lever at the bottom of base. On/Off lever releases magnet. Suitable for stem diameter 6 & 8mm. Column: 16mm dia. x 335mm

Flexi-Stand

Hub Micrometers - Enamelled Frame

Tungsten carbide tipped measuring faces. Clear graduations on satin chrome finish.
Accuracy:
Parallelism: (2+L/100)mm.
Flatness: 0.6mm.
Instrument Error: 0-75mm ±2µm, 75-100mm ±3µm.

L = maximum measuring length.

Series 147

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Dial Depth Gauges

Designed for measuring the depth of holes, narrow grooves and steps. Hardened steel base, ground and microlapped. Dial indicator attached to the base by a clamp screw and is easily interchangeable. Spindle lifting lever is maintained under spring pressure.

Series 7

Rods supplied: 0-200mm: 10, 20, 30 & 100mm 0-8": 1, 2 & 4"

Point Micrometers - Enamelled Frame

With 15 or 30 Pointed Anvils (0.3mm Point Radius), for measuring in areas of restricted access. Quick and easy wear adjustment, positive locking clamp and ratchet stop. Accuracy: Parallelism: 3 mu m. Instrument Error: (2L/75) mu m (fraction rounded up). Graduation: 0.001" (0.01mm) L Maximum measuring length. 1"/25mm 55.3mm, 2"/50mm 80.3mm

112 Series

30mm Extension Rod

Metric 2.5 x 5mm thread for use with Metric Indicators, and Series 7 Depth Gauges. Steel.