Mitutoyo Universal Bevel Protractor

Series 187
High-precision angle gauge for accurate measurement of machines, moulds and jigs.
For use as a reference for assembling and machining.
Minimum reading: 5min.

Series 187

Type: 150mm/6"

Mitutoyo Single Rod Depth Micrometers

Single Rod Type with bases hardened, precision ground and micro-lapped. All other surfaces are satin-chrome finished. The screw is also precision ground and lapped. Ratchet stop. Spanner wrench with each micrometer. Accuracy: Instrument Error: /-3mm. Flatness of reference face (bottom face of base) 1.3mm for 60mm/2.5" base. 2mm for 100mm/4" base.

128 Series

Enamelled Frame External Micrometer Sets

Economy type with carbide tipped anvils. Supplied complete with measuring standard.

Accuracy: Flatness: 0.6um for up to 300mm (12").
Parallelism: (2plusL/100)um (fraction rounded down). Instrument Error: plus/minus(1plusL/75)um (fraction rounded up).
Graduation: 0.01mm/.001".
L equals maximum measuring length.

103 Series

Inch
Range: 0-12".
Set contents: 0-1, 1-2, 2-3, 3-4, 4-5, 5-6, 6-7, 7-8, 8-9, 9-10, 10-11, 11-12" plus 11 Standards.
Weight: 10.1kg.

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Dial Indicators - 41mm Diameter Face

Jewelled Type with Limit hands and Rev. Counter

Series 1

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Dial Indicators - 1 1/2" Diameter Face

With Rev. Counter

Series 1

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Clock Only

Point Micrometers - Enamelled Frame

With 15 or 30 Pointed Anvils (0.3mm Point Radius), for measuring in areas of restricted access. Quick and easy wear adjustment, positive locking clamp and ratchet stop. Accuracy: Parallelism: 3 mu m. Instrument Error: (2L/75) mu m (fraction rounded up). Graduation: 0.001" (0.01mm) L Maximum measuring length. 1"/25mm 55.3mm, 2"/50mm 80.3mm

112 Series

Fine Adjustment Type

Fine adjustment allows improved sensitivity of slider movement. 14 vernier face angle. Incorporates Quadri feature. Satin chrome finish with clear easy read graduations.

Series 532

Metric & Imperial Reading - Graduation: 0.02mm/0.001"