Digimatic Caliper

Inch/metric conversion. Zero set at any point. SPC data output. Round measuring faces for accurate ID measurement. Power supply - battery 1 off SR44. - Supplied

550 Series

Resolution 0.01mm/ 0.0005"

Type IDS

Can be used on its own or part of a gauging system. Digimatic data output and inch/metric conversion. Direction change, origin setting, ABSolute feature. Battery life of up to 20,000 hours continuous use. With back lug on centre, for use in any imperial clamping facility (9.52mm - 3/8" diameter sleeve will need to be purchased separately).

Digital Indicator - Series Type 543 IDS

Type IDS
Can be used on its own or part of a gauging system. Digimatic data output and inch/ metric conversion.
Direction change, origin setting,
ABSolute feature.
Battery life of up to 20,000 hours continuous use.
With back lug on centre, for use in any imperial clamping facility (9.52mm - 3/8" diameter sleeve
will need to be purchased separately).

Range: 12.7mm/0.5".
Accuracy: 0.02mm/0.0008".
Resolution: 0.01mm/0.0005".

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output. Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882) - supplied. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3 mu m. L equals maximum measuring length. Resolution: 0.001mm/0.00001".

293 series

Micrometer Accessories

For Metric Micrometers (5mm Ball)

Micrometer Ball Attatchment

Screw Thread Micrometer

Anvils

126 Series

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Blade Micrometers - Satin Chrome Finished Frame

For the measurement of narrow grooves in forming tools, shaft diameters, keyways, splines, etc. The spindle is non-rotating, the anvils hardened and precision lapped. Made of forged steel the frame is fitted with heat plates. The sleeve and thimble are satin finished. Blade thickness: 0.030" (0.75mm). Measuring Depth: 0.25" (6.5mm). Parallelism: 0.00012"/3mm up to 2"/50mm. (3L/100)mm, (0.000120.00004L/4)" for models over 2"/50mm. Graduation: 0.0001" (0.01mm). Blade dimensions: a: 0.256" (6.5mm), b: 0.236" (6mm), c: 0.030" (0.75mm). Accuracy: /-3mm for up to 75mm, /-4mm for 75-100mm

122 Series

Accuracy:
3mm for up to 75mm.
4mm for 75 - 100mm.

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139