Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series

Mechanical Digital Micrometers

With drop forged steel frame, micro-lapped Tungsten Carbide tipped measuring faces and constant force ratchet. Accuracy: 0-75mm /- 2 mu m, 75-150mm /- 3 mu m. Flatness: 0.6 mu m for up to 300mm. Parallelism: (2L/100) mu m (fraction rounded down). Counter to 0.01mm (.001"). Vernier scale graduated to 0.001mm (.0001").
L maximum measuring length

Series 193

Metric

Interchangeable Anvil Type

One piece carbide tip spindle and six interchangeable anvils. Positive locking clamp and ratchet stop. Supplied with standards. Power Supply: Battery 1 off SR44 (PAN-904-5020K) supplied. Accuracy: Parallelism: (2L/100)mm (fraction rounded down). Flatness: within 0.6mm for up to 300mm within 1.0mm for up to 1000mm. Instrument Error: (4L/75)mm (fraction rounded up). Resolution: 0.001mm/0.00005"

Series 340

Spline Micrometers - Enamelled Frame

Small carbide tipped (3mm dia. x 10mm) anvils to fit around and into splined shafts, slots and keyways. Satin chrome finish thimble and sleeve, constant force ratchet and positive locking clamp. Accuracy: Parallelism: (2L/100) mu m (fraction rounded down). Flatness: 0.3 mu m. Instrument Error: /-3 mu m L maximum measuring length.

111 Series

Mini Micro Heads

The smallest micro-heads available from Mitutoyo. They are usually built into tools and instruments to enable the fine adjustment of small linear distances. Measuring face hardened. Without ratchet stop. Graduations: 0.01mm (.001"). Accuracy: /-5 mu m

Series 148

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets

Heavy Duty Vernier Caliper

Thumb wheel and locknut with fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 160

Metric & Imperial Reading Graduation: 0.02mm/0.001"

HDS Type Height Gauge

Choice of ABSOLUTE or Incremental measurement modes. ABSOLUTE system holds the reference point indefinately. No group speed errors. Hight contrast 6-digit LCD-display allows fast and accurate reading. Specially contoured base and large controls make handling easy.

570-312 Digimatic Height Gauge

Accuracy: 0-600mm /- 0.05mm, Resolution: 0.01mm/0.0005", Range: 600mm/24", Weight: 6.4kg.