Mitutoyo ABSolute Coolant Proof Digimatic Calipers

IP67 inside/outside digital caliper with depth bar and ABSOLUTE scale. Superb resistance to water, oil, dust and coolant, making it ideal for tough workshop applications.
Easy to read LCD display. internal, external, height and step measurement (quadri feature). Inch/metric conversion. Origin setting with intelligent memory that retains this setting even with the power off. Zero setting.
No overspeed error. Locknut.
Accuracy: 0.02mm/0.001".
Resolution: 0.01mm/0.0005".
Protection: IP67.
Extra batteries available - Order Code ENR -904-0150K.

Economy Series 500

With Data Output

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Dial Depth Gauges

Designed for measuring the depth of holes, narrow grooves and steps. Hardened steel base, ground and microlapped. Dial indicator attached to the base by a clamp screw and is easily interchangeable. Spindle lifting lever is maintained under spring pressure.

Series 7

Rods supplied: 0-200mm: 10, 20, 30 & 100mm 0-8": 1, 2 & 4"

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Heavy Duty Vernier Caliper

Thumb wheel and locknut with fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 160

Metric & Imperial Reading Graduation: 0.02mm/0.001"

76.5mm (3") Diameter Face

Limit hands, large size with back lug on centre.

Series 3

Rev. Counter with Spindle Cap

Micrometer Heads

Standard end, spherical end & reverse reading.
Accuracy:
Metric: ±2µm. Graduation: 0.01mm.
Imperial: ±0.0001". Graduation: 0.001".

Series 148

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Mitutoyo Depth Micrometer - HDS Type

329 Series
The six rods are adjustable in either direction for calibration and wear compensation.
Base length: 100mm.
Rod: diameter - 4mm.
Measuring length per rod: 1?/25mm.
Power supply: battery 1x SR44
Order Code PAN-904-5020K supplied.

Accuracy:
Flatness of reference face (base): 2m.
Flatness of measuring face of rod: 0.3m.
Parallelism between reference face and measuring face: (4+L/50)m (fraction rounded up).
Zero point error of rod: (2+L/75)m (fraction rounded up).
Instrument error: 3m.