Mechanical Tube Micrometers - Enamelled Frame

For measuring wall thickness, collars, tubing etc. checking dimensions from inside holes to outside edges. Measuring faces are carbide tipped, anvil and spindle are hardened, precision ground and micro-lap finished. Glare-free satin chrome sleeve and thimble, ratchet stop and positive locking clamp. Instrument Error: /-3mm.

Series 115

One Spherical Face Type

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Screw Thread Micrometer

Anvils

126 Series

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Enamelled Frame External Micrometer Sets

Economy type with carbide tipped anvils. Supplied complete with measuring standard.

Accuracy: Flatness: 0.6um for up to 300mm (12").
Parallelism: (2plusL/100)um (fraction rounded down). Instrument Error: plus/minus(1plusL/75)um (fraction rounded up).
Graduation: 0.01mm/.001".
L equals maximum measuring length.

103 Series

Inch
Range: 0-12".
Set contents: 0-1, 1-2, 2-3, 3-4, 4-5, 5-6, 6-7, 7-8, 8-9, 9-10, 10-11, 11-12" plus 11 Standards.
Weight: 10.1kg.

Mitutoyo Interchangeable Rod Depth Micrometers

The interchangeable rod depth micrometer is available as standard mechanical, mechanical digital and electronic digimatic (see separate digimatic entry). All models have hardened tool steel bases. Measuring rods are ground and micro-lapped on the faces. The sleeve and thimble are satin-chrome finished. Rod diameters are .157" (4mm) and are adjustable in either direction for calibration and wear compensation. Accuracy: Rod Diameter: 4mm. Measuring length per rod: 1" (25mm). Instrument Error: /-3mm. Flatness of reference face (bottom face of base)1.3mm for 60mm/2.5"base. 2mm for 100mm/4"base.

129 Series

Heavy Duty Long Jaw

Longer jaws allow measurements to be taken where a standard caliper would not reach. Fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 534