Mini Micro Heads

The smallest micro-heads available from Mitutoyo. They are usually built into tools and instruments to enable the fine adjustment of small linear distances. Measuring face hardened. Without ratchet stop. Graduations: 0.01mm (.001"). Accuracy: /-5 mu m

Series 148

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139

Hub Micrometers - Enamelled Frame

Tungsten carbide tipped measuring faces. Clear graduations on satin chrome finish.
Accuracy:
Parallelism: (2+L/100)mm.
Flatness: 0.6mm.
Instrument Error: 0-75mm ±2µm, 75-100mm ±3µm.

L = maximum measuring length.

Series 147

Satin Chrome Finished Frame

Applications include measuring wall thickness of cylinders and tubes, shoulder to edge distance, rivet head height etc., accomplished using the: standard flat anvil, rod anvil, or optional V-anvil. Easily interchanged, with constant force ratchet and positive locking clamp. Quick and easy zero adjustment. Interchangeable anvils supplied: Flat anvil: (201216). Rod anvil: (201217) 3mm diameter for 0-25mm/0-1", (201379) 5mm diameter for 25-50mm/1-2". V-anvil: (201218) Available at extra cost. For measuring thickness of screw, shoulder length etc. Accuracy: Flatness: 2mm (Anvil Face), 0.6mm (Spindle Face). Parallelism: 3mm. Instrument Error: /-4mm.

Series 117

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble