Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets

External Micrometers with Heat Shield

Tapered (on anvil side) for hard to reach places. Supplied without measuring standards. Tungsten Carbide tipped anvils. Accuracy:
Flatness: 0.6 mu m for 0.01mm (0.001") graduation,
0.3 mu m for 0.001mm (0.0001") graduation.
Parallelism: 1 mu m for 0-25mm (0-1") Models, 2 mu m for 25-50mm (1-2") Models.
Instrument Error: /-2 mu m.

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series

Digimatic Absolute Calipers

The absolute zero feature enables an (ABS) 'origin point' to be set anywhere within the measuring range. When this point is established, the distance from this position will always be displayed, the intelligent memory retains the 'origin point' even when powered off. SPC output and inch metric conversion. Error-free operation. Infinite response speed. Large LCD display. Incremental feature. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Series 543 Digimatic Indicator - Type IDC

543-401B
Simple to use yet powerful features make this Indicator an exceptionally productive instrument for many applications.

Range: 0 - 12.7mm/0 - 0.5".
Accuracy:
0.02mm/0.0008".
Features:
Large LCD display,
Inch/metric conversion.
ABSolute feature.
Direction change.
Zero setting.
On/off.
Preset.
Tolerance setting.
Data output.
Magnified judgement results.
330° bezel rotation.
Resolution:
0.01mm/0.0005".

Digimatic Depth Gauge

Designed for measuring the depth of holes, narrow grooves and steps. Provided with data output for SPC systems. Uses IDC Digimatic Indicator. Both models supplied with 4 rods. Power supply: Batteries 2 off SR44 (PAN-904-5020K). Resolution: .0005"/0.01mm.

Series 547 "ABSolute"

Mitutoyo Single Rod Depth Micrometers

Single Rod Type with bases hardened, precision ground and micro-lapped. All other surfaces are satin-chrome finished. The screw is also precision ground and lapped. Ratchet stop. Spanner wrench with each micrometer. Accuracy: Instrument Error: /-3mm. Flatness of reference face (bottom face of base) 1.3mm for 60mm/2.5" base. 2mm for 100mm/4" base.

128 Series

Series 506

Compact and lightweight for portable use, suitable for measuring small workpieces and scribing. Carbide tipped scriber.
Fine adjustment range: 4mm.
Accuracy: ±0.03mm/0.001”.

57.4mm Diameter Face

Conventional size, easy to read indicator for most general applications.



Graduation: 0.001mm
Travel: 5mm
Reading: 0-100-0