Type IDF

Reflective photoelectric linear encoder with no mechanical amplification for unsurpassed durability. High measuring accuracy. Digimatic output to SPC systems. Preset, zero set and tolerance setting, inch/metric conversion (on inch/metric models) and direction changeover. Also go/ng judgement, data load, error alarm, mean value, maximum/minimum, runout measurement and on/off function.

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets

Fine Adjustment Type

Fine adjustment allows improved sensitivity of slider movement. 14 vernier face angle. Incorporates Quadri feature. Satin chrome finish with clear easy read graduations.

Series 532

Metric & Imperial Reading - Graduation: 0.02mm/0.001"

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Heavy Duty Vernier Caliper

Thumb wheel and locknut with fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 160

Metric & Imperial Reading Graduation: 0.02mm/0.001"

Mechanical Digital Micrometers

With drop forged steel frame, micro-lapped Tungsten Carbide tipped measuring faces and constant force ratchet. Accuracy: 0-75mm /- 2 mu m, 75-150mm /- 3 mu m. Flatness: 0.6 mu m for up to 300mm. Parallelism: (2L/100) mu m (fraction rounded down). Counter to 0.01mm (.001"). Vernier scale graduated to 0.001mm (.0001").
L maximum measuring length

Series 193

Metric

Mitutoyo Depth Micrometer - HDS Type

329 Series
The six rods are adjustable in either direction for calibration and wear compensation.
Base length: 100mm.
Rod: diameter - 4mm.
Measuring length per rod: 1?/25mm.
Power supply: battery 1x SR44
Order Code PAN-904-5020K supplied.

Accuracy:
Flatness of reference face (base): 2m.
Flatness of measuring face of rod: 0.3m.
Parallelism between reference face and measuring face: (4+L/50)m (fraction rounded up).
Zero point error of rod: (2+L/75)m (fraction rounded up).
Instrument error: 3m.

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)