Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

Heavy Duty Vernier Caliper

Thumb wheel and locknut with fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 160

Metric & Imperial Reading Graduation: 0.02mm/0.001"

HDS Type Height Gauge

Choice of ABSOLUTE or Incremental measurement modes. ABSOLUTE system holds the reference point indefinately. No group speed errors. Hight contrast 6-digit LCD-display allows fast and accurate reading. Specially contoured base and large controls make handling easy.

570-312 Digimatic Height Gauge

Accuracy: 0-300mm /- 0.04mm, Resolution: 0.01mm/0.0005", Range: 300mm/12", Weight: 4.6kg.

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Dial Calipers

Easy read dial suitable for use where a scale would be difficult to read. Satin chrome finish. Incorporates quadri feature.

Series 505

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Micrometer Heads

Spindle Diameter: 6.35mm - Tungsten Carbide Tipped. Spindle Housing Diameter: 10mm. Spindle Pitch: 1mm/.025mm. Main Body Diameter: 18mm. Overall length: 109mm. Accuracy (full scale): Metric: /-2 mu m Imperial: /-0.0001"

Series 150

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141