Disc Type - Rotating Spindle

Measurable gear pitch: 0.5-6 module. resolution: .001mm/.00005". Disc Diameter: 20mm/0.787". Accuracy:Instrument Error: 0-50mm 4mm, 50-100mm 6mm, Parallelism: 0-50mm 4mm, 50-100mm (4L/50)mm. Flatness: 1mm L maximum measuring length

Series 323

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Dial Indicators - 41mm Diameter Face

Water Resistent Type. Model 1900F-60 has limit hands, stroke 2mm and a white/red dial. Model 1929F-60 has limit hands, stroke 3.5mm and a yellow/red dial.

Series 1

Pocket Comparators

By replacing reticles (optional), dimensional, angle and other types of measurements can be performed.

Series 183

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Clock Only

Digimatic Caliper

Inch/metric conversion. Zero set at any point. SPC data output. Round measuring faces for accurate ID measurement. Power supply - battery 1 off SR44. - Supplied

550 Series

Resolution 0.01mm/ 0.0005"

Depth Base Attachment

Suitable for 100mm (4") to 300mm (12") vernier and dial calipers with a depth measuring bar. Finely ground base surface and secure locking clamp.

57.4mm Diameter Face

Jewelled Type, with Limit Hands and Rev. Counter

Series 2