Heavy Duty Long Jaw

Longer jaws allow measurements to be taken where a standard caliper would not reach. Fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 534

Dial Depth Gauges

Designed for measuring the depth of holes, narrow grooves and steps. Hardened steel base, ground and microlapped. Dial indicator attached to the base by a clamp screw and is easily interchangeable. Spindle lifting lever is maintained under spring pressure.

Series 7

Rods supplied: 0-200mm: 10, 20, 30 & 100mm 0-8": 1, 2 & 4"

Mitutoyo Universal Bevel Protractor

Series 187
High-precision angle gauge for accurate measurement of machines, moulds and jigs.
For use as a reference for assembling and machining.
Minimum reading: 5min.

Series 187

Type: 150mm/6"

Mitutoyo Single Rod Depth Micrometers

Single Rod Type with bases hardened, precision ground and micro-lapped. All other surfaces are satin-chrome finished. The screw is also precision ground and lapped. Ratchet stop. Spanner wrench with each micrometer. Accuracy: Instrument Error: /-3mm. Flatness of reference face (bottom face of base) 1.3mm for 60mm/2.5" base. 2mm for 100mm/4" base.

128 Series

Heavy Duty Vernier Caliper

Thumb wheel and locknut with fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 160

Metric & Imperial Reading Graduation: 0.02mm/0.001"

Fine Adjustment Type

Fine adjustment allows improved sensitivity of slider movement. 14 vernier face angle. Incorporates Quadri feature. Satin chrome finish with clear easy read graduations.

Series 532

Metric & Imperial Reading - Graduation: 0.02mm/0.001"

Mitutoyo Interchangeable Rod Depth Micrometers

The interchangeable rod depth micrometer is available as standard mechanical, mechanical digital and electronic digimatic (see separate digimatic entry). All models have hardened tool steel bases. Measuring rods are ground and micro-lapped on the faces. The sleeve and thimble are satin-chrome finished. Rod diameters are .157" (4mm) and are adjustable in either direction for calibration and wear compensation. Accuracy: Rod Diameter: 4mm. Measuring length per rod: 1" (25mm). Instrument Error: /-3mm. Flatness of reference face (bottom face of base)1.3mm for 60mm/2.5"base. 2mm for 100mm/4"base.

129 Series

Metric

Ideal for internal measurements. Can be set with a micrometer or ring gauge. Spring loaded legs retracted with a plunger.

HDS Type Height Gauge

Choice of ABSOLUTE or Incremental measurement modes. ABSOLUTE system holds the reference point indefinately. No group speed errors. Hight contrast 6-digit LCD-display allows fast and accurate reading. Specially contoured base and large controls make handling easy.

570-312 Digimatic Height Gauge

Accuracy: 0-600mm /- 0.05mm, Resolution: 0.01mm/0.0005", Range: 600mm/24", Weight: 6.4kg.

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets