Digimatic Type Absolute Calipers

With SPC Data output. Inch/metric conversion. On/Off. Zero set at any point. Data/Hold facility. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Digimatic Absolute Calipers

The absolute zero feature enables an (ABS) 'origin point' to be set anywhere within the measuring range. When this point is established, the distance from this position will always be displayed, the intelligent memory retains the 'origin point' even when powered off. SPC output and inch metric conversion. Error-free operation. Infinite response speed. Large LCD display. Incremental feature. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Standard Vernier Caliper

14 Vernier face angle provides easy reading. Thumbwheel and locknut. Incorporates Quadri feature.

Series 530

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

57.4mm Diameter Face

Water Proof Limit Hands Type (2124F&2046F-60: Jewelled)

Series 2

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Mitutoyo Single Rod Depth Micrometers

Single Rod Type with bases hardened, precision ground and micro-lapped. All other surfaces are satin-chrome finished. The screw is also precision ground and lapped. Ratchet stop. Spanner wrench with each micrometer. Accuracy: Instrument Error: /-3mm. Flatness of reference face (bottom face of base) 1.3mm for 60mm/2.5" base. 2mm for 100mm/4" base.

128 Series

Illumination Attachment

To suit Mitutoyo Pocket Comparator (MIT-325-3240A)

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)