Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

57.4mm Diameter Face

Conventional size, easy to read indicator for general applications.

Series 2

Mitutoyo Interchangeable Rod Depth Micrometers

The interchangeable rod depth micrometer is available as standard mechanical, mechanical digital and electronic digimatic (see separate digimatic entry). All models have hardened tool steel bases. Measuring rods are ground and micro-lapped on the faces. The sleeve and thimble are satin-chrome finished. Rod diameters are .157" (4mm) and are adjustable in either direction for calibration and wear compensation. Accuracy: Rod Diameter: 4mm. Measuring length per rod: 1" (25mm). Instrument Error: /-3mm. Flatness of reference face (bottom face of base)1.3mm for 60mm/2.5"base. 2mm for 100mm/4"base.

129 Series

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Dial Calipers

Easy read dial suitable for use where a scale would be difficult to read. Satin chrome finish. Incorporates quadri feature.

Series 505

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Mitutoyo Universal Bevel Protractor

Series 187
High-precision angle gauge for accurate measurement of machines, moulds and jigs.
For use as a reference for assembling and machining.
Minimum reading: 5min.

Series 187

Type: 150mm/6" Rule