Screw Thread Micrometer

Anvils

126 Series

10mm Extension Rod

Metric 2.5 x 5mm thread for use with Metric Indicators, and Series 7 Depth Gauges. Steel.

Disc Micrometers - Enamelled Frame

For measuring a displacement over a given number of gear teeth, closely spaced sections, ribs, keys and fins etc. Measurable gear pitch: 0.5-6 module. Graduation: 0.01mm (.001"). Accuracy: Parallelism: 0-50mm 4 mu m, 50-100mm (4L/50) mu m. Flatness: 1 mu m. Instrument Error: 0-50mm /-4 mu m, 50-100mm /-6 mu m. L maximum measuring length

123 Series

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

57.4mm Diameter Face

Conventional size, easy to read indicator for general applications.

Series 2

Jewelled Type

Digimatic Depth Gauges

Designed for measuring depth of hole, slots and recesses. Can be fitted with an extension base to extend its span. Base size 100mm. Functions: Inch/metric conversion. zero at any point. SPC data output. Power supply: Battery 1 off SR44 (PAN-904-5020K). Resolution: 0.0005"/0.01mm

Series 571 "ABSOLUTE"

57.4mm Diameter Face

With Limit Hands and Large Rev. Counter

Series 2

Mechanical Digital Micrometers

With drop forged steel frame, micro-lapped Tungsten Carbide tipped measuring faces and constant force ratchet. Accuracy: 0-75mm /- 2 mu m, 75-150mm /- 3 mu m. Flatness: 0.6 mu m for up to 300mm. Parallelism: (2L/100) mu m (fraction rounded down). Counter to 0.01mm (.001"). Vernier scale graduated to 0.001mm (.0001").
L maximum measuring length

Series 193

Metric

Mitutoyo Single Rod Depth Micrometers

Single Rod Type with bases hardened, precision ground and micro-lapped. All other surfaces are satin-chrome finished. The screw is also precision ground and lapped. Ratchet stop. Spanner wrench with each micrometer. Accuracy: Instrument Error: /-3mm. Flatness of reference face (bottom face of base) 1.3mm for 60mm/2.5" base. 2mm for 100mm/4" base.

128 Series

Satin Chrome Finished Frame

Designed for measuring grooves, recesses and shoulders located inside a bore. They measure not only thickness and spacing of grooves, but also measure from an edge to a land, or from shoulder to groove. Spindle hardened and precision ground, with micro-lap finish on measuring face. Every thousandth is numbered for easy reading. To measure: Width of groove, Width of Land. To determine: Location of Groove, Depth of bottom of groove. Accuracy: Parallelism: 10 mu m. Instrument Error: /-10 mu m. Graduation: 0.01mm 0.001"

Series 146