76.5mm (3") Diameter Face

Limit hands, large size with back lug on centre.

Series 3

Rev. Counter with Spindle Cap

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Series 543 Digimatic Indicator - Type IDC

543-471B
Simple to use yet powerful features make this Indicator an exceptionally productive instrument for many applications.
Features:
Large LCD display. Inch/metric conversion.
ABSolute feature. Direction change.
Zero setting. On/off. Preset. Tolerance setting.
Data output. Magnified judgement results.
330° bezel rotation.
Range:
0 - 125.4mm/0 - 1".
Accuracy:
0.003mm/0.00012".
Resolution:
0.01mm/0.0005".

57.4mm Diameter Face

With Limit Hands and Rev. Counter

Series 2

57.4mm Diameter Face

Peak Retaining Type With Limit Hands

Series 2

57.4mm Diameter Face

Conventional size, easy to read indicator for most general applications.



Graduation: 0.01mm
Travel: 5mm
Reading: 0-100

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139