Plain Surface Plates

Surface plates are used when a precision surface is key. These plates are manufactured from high quality of close grained cast iron and are stress relieved against distortion by heat treatment. Rigidity and long lasting accuracy are ensured by adequate top and side thickness and ribbed construction. The surfaces are free from pin holes, planed and hand scraped. Manufactured to BS 817.

Oxford Height Gauges

Designed for accurate marking out and taking precise measurements.
Measuring head positioned on sturdy twin columns providing highly repeatable height measurements and stability.
Easy reading with dual directional negative and positive reading mechanical digital counters.
Rotating dial face.
Independently set the counters, to zero at any position.
Large feed wheel for rapid and precise adjustment.
Tungsten carbide tipped scriber for accurate marking out.
Manufactured from durable stainless steel.

Granite Surface Plate Stand

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Squares

For measuring and inspecting squareness, parallelism and alignment. Manufactured to BS939 : 1977 Grade A for flatness, straightness and squareness of working faces. Supplied with UKAS certificate.

Oxford Weighing Scales

The Oxford range of weighing equipment provides you with a choice of capacity and accuracy to suit the majority of purposes.

WS-6E Digital Weighing Scales up to 6Kg/12lb

The Oxford WS-6E digital weighing scales are suitable for office, post room and store use. Digital display. Designed to run on mains power via the 12Vdc 650mA AC adaptor provided or the 6V4AH integral rechargeable battery, these scales will run for up to 20 hours on a single full charge.

Functions:
Zero/on/Auto-Off
Tare unit

Specification:
Capacity: 6kg /12lb
Graduation: 0.001kg/0.002lb

Oxford Precision™ External Micrometers

With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25-50mm/1-2" and over supplied with setting standard. All supplied in a high quality fitted metal case. Manufactured to BS 870.

Metric

Micrometer Head

Spindle Diameter: 5mm
Spindle Housing Diameter: 9.5mm
Range: 0-13mm
Graduation: 0.01mm
Main Body Diameter: 14mm
Accuracy: 0.004mm

Spherical Spindle Type

Dial Calipers

Rack covers prevent dust from fouling teeth of racks. All measuring faces are precision ground and micro lapped for absolute internal, external, depth and step readings. Manufactured to DIN 862.

Spare Anvils Oxford Dial Indicating Bore Gauges

To suit Gauge Size: 50 - 160mm

Metric Gauge Sizes

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Spare Anvils Oxford Dial Indicating Bore Gauges

To suit Gauge Size: 35 - 50mm

Metric Gauge Sizes