Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Surface Plates - Grade 1 - Inspection Grade

Accurate bases which are used for mounting sensitive measuring, mechanical & electronic equipment. Manufactured to BS817. Supplied with calibration certificate.

Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Surface Plates - Grade 1 - Inspection Grade

Accurate bases which are used for mounting sensitive measuring, mechanical & electronic equipment. Manufactured to BS817. Supplied with calibration certificate.

Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Surface Plates - Grade 1 - Inspection Grade

Accurate bases which are used for mounting sensitive measuring, mechanical & electronic equipment. Manufactured to BS817. Supplied with calibration certificate.

Dial Calipers

Rack covers prevent dust from fouling teeth of racks. All measuring faces are precision ground and micro lapped for absolute internal, external, depth and step readings. Manufactured to DIN 862.

Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Squares

For measuring and inspecting squareness, parallelism and alignment. Manufactured to BS939 : 1977 Grade A for flatness, straightness and squareness of working faces. Supplied with UKAS certificate.

Oxford Precision? Electronic Tally Counter - Up

Electronic tally counter counts
up to 9999. Four-digit LCD
with large push-buttons.
High-impact construction with
comfortable rubber keys.
Optional audible counting
indicator.
Battery included.
WxDxH: 30x15x60mm.

Leg Type Dial Calipers

Used for measuring diameters and narrow grooves in hard to reach places.



Internal specifications: range: 55 - 75mm, graduation: .01mm,
groove depth: 8mm, groove width: 3mm, maximum reach: 100mm.

Extended Jaw Vernier Calipers

For taking internal and external readings. Dual reading scale (metric and inch) with 14 bevelled vernier scale for reduced parallax reading error, fine adjustment assembly and knurled locking nut. Internal reading edges have rounded faces for accurate bore measurement. Manufactured from hardened stainless steel. Conform to DIN 862.

Vernier Calipers

Inside, outside, depth and step reading. Dual reading scale (metric and inch) with 14 bevelled vernier scale. Knurled locking nut. Manufactured from hardened stainless steel with satin finish.
Graduation: 0.02mm & 0.001 inch.
Tolerance: plus/minus 0.03mm & 0.001 inch.

Oxford Precision™ Vernier Bevel Protractor

Suitable for measuring and marking out angles. Fully hardened and ground stainless steel. Bevelled blade ends. Scale plate is graduated 0° - 90° - 0°, in both directions through
360°. Magnifying lens for easy reading of Vernier scale to 5 minutes of degree (1/12th of a degree).