Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Fine - Class Tolerance 6G

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

UNF - Class Tolerance 2A

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Heavy Duty Fitment - Plain

Fitted as standard to KEN-333-2070K. To suit 1/4" I/D lug, stem/spigot diameter 1/8", 1/4", 5/16" & 3/8".
Column: 20mm x 266mm.
Cross Bar: 12mm x 200mm.
Threaded: M8 x 1.25mm.

Bowers Metrology Sylvac Digital Micrometer Heads

Data output RS232. Selection of measuring direction,
preset function, absolute of relative
measurement.
Resolution: 0.001mm.
Repeatability: 2.

30-852-2001 Digital Micrometer Head

Measuring range: 0 - 25mm.
Maximum error: 5µm.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Fine - Class Tolerance 6G

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

BSPF - Medium Class Tolerance

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

Metric Fine - Class 6H Tolerance

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

Metric Coarse - Class Tolerance 6G

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

Metric Fine - Class 6H Tolerance

Oxford Precision™ Dial Indicating Bore Gauges

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point' can be set by using a setting ring of a known diameter or a micrometer. Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.