Oxford Precision? Angle Plates

Manufactured from close grained cast iron. BS : 5535 Grade B.

Webbed End

Webbed slotted angle plates can be used for rapid mounting fixtures for machine set-up, layout, or inspection.
They are heavily ribbed for strength and rigidity.
Sides and ends are machine finished.

Oxford Precision™ Dial Indicating Bore Gauges

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point' can be set by using a setting ring of a known diameter or a micrometer. Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Surface Plates - Grade 1 - Inspection Grade

Accurate bases which are used for mounting sensitive measuring, mechanical & electronic equipment. Manufactured to BS817. Supplied with calibration certificate.

Leg Type Dial Calipers

Used for measuring diameters and narrow grooves in hard to reach places.



Internal specifications: range: 55 - 75mm, graduation: .01mm,
groove depth: 8mm, groove width: 3mm, maximum reach: 100mm.

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

Leg Type Dial Calipers

Used for measuring diameters and narrow grooves in hard to reach places.



External specifications: range: 0 - 20mm, graduation: 0.01mm,
groove depth: 6mm, groove width: 3mm, throat depth: 60mm.

Easy Read Dial Test Indicators

Lever Type
Supplied with dovetail fitting and 6 & 8mm spigot. Matt finish chromed housing.



1 1/4" Dial Diameter

Oxford Height Gauges

Designed for accurate marking out and taking precise measurements.
Measuring head positioned on sturdy twin columns providing highly repeatable height measurements and stability.
Easy reading with dual directional negative and positive reading mechanical digital counters.
Rotating dial face.
Independently set the counters, to zero at any position.
Large feed wheel for rapid and precise adjustment.
Tungsten carbide tipped scriber for accurate marking out.
Manufactured from durable stainless steel.