Pipette Tips

Manufactured from virgin polypropylene and metal-free pigments. High translucency for excellent visibility of sample. Hydrophobic surface to minimise fluid retention. Precision moulded for clean delivery. Non-sterile and autoclavable at 121C. Available bulk packed, an economical choice for the busy laboratory, or as rack packed refills for ease of handling. Sterility: (NS) Non sterile.

Other sizes available on request.

Cuvettes

Suitable for use with most spectrophotometers for water analysis, chemistry and life science applications. Choice of material: - Optical quality polystyrene for use at visible wavelengths (340 to 900nm) - Optical quality acrylic (PMMA) for use at ultra violet wavelengths (300 to 900nm). Each case contains cuvettes from the same mould cavity to ensure minimal dimensional variation. Standard absorption variation between cuvettes is better than plus/minus 0.005 absorbency units. Two sizes available - semi-micro cuvette and macro cuvette. Standard path length of 10mm. Frosted sides on the cuvette. Recessed windows reduce the risk of scratching during use. For ease of use an arrow feature indicates the direction of light transmission. Packed in expanded polystyrene (EPS) foam trays for optimum protection ensuring scratch free product at the time of use. Material: (PS) Polystyrene. Sterility: (NS) non sterile.

Sample Containers

Ideal for sample containment. CE marked in accordance with the European Directive 98/79/EC. For in vitro use only. Choice of plastic or metal flow seal cap. Leak tested in accordance with EN14254 Annexe D and BS5213. Aseptically manufactured under cleanroom conditions (class 7 ISO 14644) to exclude microbiological contamination. Manufactured from virgin polystyrene. All materials are non-cytotoxic. Sterility: (AS) Aseptic Manufacture.

Petri Dish 90mm Triple Vent

Used by microbiologists to culture micro-organisms on solid media. Available either: Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination. Terminally sterilised by gamma irradiation. CE marked in accordance with European Directive 98/79/EC. In vitro use only. Produced and tested in accordance with the BS611 part 2 standard, which includes stringent dimensional controls. Ideal for use in automatic plate pourers. Available in single,triple and non-vented formats. Triple vented - aids gaseous exchange. Ideally suited for short term work.

Polypropylene Containers

Designed specifically for sampling within the food and industrial laboratories. Manufactured from shatterproof polypropylene for maximum safety. Will surface when dropped into aqueous solutions. Deep threaded cap to ensure sample containment. Extensive range from 30ml to 125ml. Aseptically manufactured. Colour base/cap: Clear/white. Materials base/cap: (PP/PE) Polypropylene, polyethylene. Sterility: (AS) Aseptic Manufacture.

Petri Dish, 55mm, Contact Plate

Ideal for use in routine hygiene monitoring of surfaces Concave profile of the dish raises the profile of the media when set giving better contact between the agar bed and surface under test. 25cm2 surface area - conforms to both the Institute of Environmental Sciences (IES, 1993)and the International Pharmaceutical Federation (I.P.F., 1990) Standards. Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination. Triple vented - aids gaseous exchange. Numbered grid on the base - facilitates colony counting. Deep skirted base - aids stability when stacked. Sterility: (AS) Aseptic Manufacture.

Pipette Tips

Manufactured from virgin polypropylene and metal-free pigments. High translucency for excellent visibility of sample. Hydrophobic surface to minimise fluid retention. Precision moulded for clean delivery. Non-sterile and autoclavable at 121C. Available bulk packed, an economical choice for the busy laboratory, or as rack packed refills for ease of handling. Sterility: (NS) Non sterile.

Other sizes available on request.

Sample Containers

Ideal for sample containment. CE marked in accordance with the European Directive 98/79/EC. For in vitro use only. Choice of plastic or metal flow seal cap. Leak tested in accordance with EN14254 Annexe D and BS5213. Aseptically manufactured under cleanroom conditions (class 7 ISO 14644) to exclude microbiological contamination. Manufactured from virgin polystyrene. All materials are non-cytotoxic. Sterility: (AS) Aseptic Manufacture.

Sample Containers

Ideal for sample containment. CE marked in accordance with the European Directive 98/79/EC. For in vitro use only. Choice of plastic or metal flow seal cap. Leak tested in accordance with EN14254 Annexe D and BS5213. Aseptically manufactured under cleanroom conditions (class 7 ISO 14644) to exclude microbiological contamination. Manufactured from virgin polystyrene. All materials are non-cytotoxic. Sterility: (AS) Aseptic Manufacture.

15ml Centrifuge Tube Bulk Pack

Recommended RCF values: - Polypropylene 15ml centrifuge tubes 6,000 x g - Polystyrene 15ml centrifuge tubes 3,500 x g. Manufactured from either optically clear polystyrene or high clarity polypropylene. Polypropylene is chemically more resistant than polystyrene and allows higher centrifugation speeds. Gamma irradiated to ensure sterility and non-pyrogenic to 0.25 EU/ml. Simple one-handed cap operation, facilitating single-handed aseptic techniques. Flat cap to allow for identification marking. Crisp white printed graduations on tube body with large marking strip for labelling. Moulded graduations on the cone of tube. Available in polystyrene foam racks or bulk packed. Capacity: 15ml. Sterility: (IRR) Irradiated for sterility. Material: tube/cap PP/PE.