Stainless Steel Mig Wire

Ideal for welding stainless steels. It has increased silicon content for an improved weld that produces a smoother more consistent bead making it ideal for use were appearance is important. For use on stainless steel structures. Supplied on a precision layer wound reel for positive uninterupted feeding. Weight: 15kg.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11 Copper Coated Mild Steel - BS1453 A1

Stainless Steel Filler Rods - 316LSi

Corrosion resistant, chromium-nickel-molybdenum rods for welding of austenitic stainless alloys. The alloy has very good resistance against corrosion in acid and chlorinated environments and also a low carbon content which makes it particularly recommended where there is a risk of intergranular corrosion.
Rod length: 1 metre
Pack weight: 5kg.

0.8% Zirconiated White Tungsten Electrodes

Ideal for high precision, exceptional quality AC welding on aluminium alloys as it retains a balled tip and has a high resistance to contamination. The current carrying capability is equal or greater than that of thoriated tungsten. Non-radioactive. Not suitable for DC welding.

Kennedy 2.4mm 0.8% Zirconiated White Tungsten Electrodes

Zirconiated tungsten electrodes (AWS classification EWZr-1) contain a minimum of 99.10% tungsten and .15 to .40% zirconium. A zirconium oxide (zirconia) alloyed tungsten electrode is
preferred for AC welding when the highest quality work is necessary and where even the smallest amounts of weld pool contamination cannot be tolerated. This is accomplished because the zirconium alloyed tungsten produces an extremely stable arc which resists tungsten spitting in the arc. The current carrying capability is equal to or slightly greater than an equal sized cerium, lanthana or thorium alloyed
electrode. Zirconium electrodes are typically used only for
AC welding with a balled end. Not to be used for DC welding.

Murex LW1 MIG Wire Reels

Precision layer wound for snag free production. Gas shielded, deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coated, double deoxidised with manganese and silicon with good mechanical properties. For use with CO2 and AR-CO2. For welding mild steel and C-Mn steels. Available in 0.8mm (15kg drum), 1.0mm and 1.2mm (18kg drums). Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1.

LW1 Mig Wire Reel

Gas & Tig Welding Rods

General purpose brazing or bronze welding rod. Suitable for brazing and bronze-welding of sheet, tube and extruded sections in all types of fabrication work, involving steel, cast iron, copper and its alloys.

Sifbronze No.1 - BS1845 CZ6 1453 C2

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Zodian Universal 6013

Medium rutile coated, all positional rods.
Applications: for stainless plate structural steels, pipe work and vessels. Ideal for food industry, chemical, pharmaceutical and processing plant fabrications.
NB suitable for AC (50V minimum open circuit) and DC+

Stainless Steel Mig Wire

Ideal for welding stainless steels. It has increased silicon content for an improved weld that produces a smoother more consistent bead making it ideal for use were appearance is important. For use on stainless steel structures. Supplied on a precision layer wound reel for positive uninterupted feeding. Weight: 15kg.

Electrodes for Mild Steels

Available in 2.6 x 300mm, 3.2mm x 350mm and 4mm x 400mm.

E7018 (?Low Hydrogen?)

Basic coated, all positional rods.
Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensate for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking.
N.B. Suitable for AC (70V minimum open circuit) and DC. Optimum rooting operability is obtained using DC-.
Recommended Amperages;
Size(mm) 2.5 3.2 4.0.
Min. 70A 95A 130A.
Max. 100A 125A 170A.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord 6013

Heavy rutile coated electrode suitable for downhand butt and fillet welding. Superb finish with self releasing slag. Applications: For steel plate and strip including structural steels.