Stainless Steel Mig Wire

Ideal for welding stainless steels. It has increased silicon content for an improved weld that produces a smoother more consistent bead making it ideal for use were appearance is important. For use on stainless steel structures. Supplied on a precision layer wound reel for positive uninterupted feeding. Weight: 15kg.

Sainless Steel Electrode S316L

A Lime-Titania electrode giving excellent useability and weldability, it deposits 19.5%Cr - 11.7%Ni - 2.5%Mo weld metal.
The Austenite structure gives good crack resisting properties. For welding of extra-low carbon 18%Cr-12Ni-Mo stainless steel.

Sterrod+ S316L 3.2mm Electrodes

2% Ceriated Grey Tungsten Electrodes

Suitable for both AC and DC welding but performs exceptionally well at low current settings in DC welding. A popular non-radioactive replacement for 2% Thoriated Tungsten Electrodes as like the thorium electrodes they are best used to weld carbon, stainless steels, nickel alloys, copper and titanium alloys. Also ideal for small and delicate welding.

Kennedy 2.4mm 2% Ceriated Grey Tungsten Electrodes

2% ceriated tungsten electrodes (AWS classification EWCe-2) contain a minimum of 97.30% tungsten and 1.80 to 2.20% cerium. These electrodes perform best in DC welding at low current settings but can be used proficiently in AC or DC processes. With its excellent arc starts at low amperages, ceriated tungsten has become popular in such applications as orbital tube and pipe manufacturing, thin sheet metal work or jobs where small and delicate parts are welded. Like thorium, it is best used to weld carbon and stainless steels, nickel alloys and titanium, making it an obvious replacement for 2% thoriated electrodes.

Ceriated tungsten features slightly different electrical characteristics than thorium but most operators will no be able to tell the difference. Using ceriated electrodes at higher amperages is not recommended. In these situations, the oxides will migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11 Copper Coated Mild Steel - BS1453 A1

Murex All Positional Welding Electrodes

One of the most versatile electrodes available, suitable for Vertical, Overhead and Downhand welding. Available in 2.5, 3.2, 4.0, 5.0 and 6mm.

Vodex 6013

High quality rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
N.B. suitable for AC (50V minimum open circuit) and DC plus/minus.

Electrodes for Stainless Steels

For welding 316 and 316L stainless steels. Available in 2.5 and 3.2mm.

Nicrex E312 Stainless Steel Electrodes

Nicrex E312 electrodes from Murex are highly alloyed stainless steel electrodes of unusual versatility. It deposits a ferritic/austenitic duplex weld metal with about 40% ferrite content.
Applications: the welding of dissimilar steel combinations such as mild or low alloy steel to stainless steel, and the welding of spring steels, nickel steels and other hardenable steels.

Aluminium Tig/Gas Welding Rods

Saffire aluminium 5% silicon & magnesium. BS 2901:Part 4 : 1990 4043A (Tig Rods). BS 1453:1972(1987) 4043A (Gas Rods) AWS A/SFA 5-10-88:ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys containing up to 5% magnesium. Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 308L

Murex All Positional Welding Electrodes

One of the most versatile electrodes available, suitable for Vertical, Overhead and Downhand welding. Available in 2.5, 3.2, 4.0, 5.0 and 6mm.

Vodex 6013

High quality rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
N.B. suitable for AC (50V minimum open circuit) and DC plus/minus.

Murex All Positional Welding Electrodes

One of the most versatile electrodes available, suitable for Vertical, Overhead and Downhand welding. Available in 2.5, 3.2, 4.0, 5.0 and 6mm.

Vodex 6013

High quality rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
N.B. suitable for AC (50V minimum open circuit) and DC plus/minus.