Aluminium Mig Wire Reels

Designed and packaged for `spool-on` guns. Also compatible for use on Kennedy Dual Mig welders, Mini Migs, Migmates etc. for aluminium alloys. For use with Ar or Ar-He shielding gas. Random wound. Available in 0.8mm and 1.0mm. 0.5kg mini reels. Made to BS 2901/1 : 1983 5356 & AWS A5.10-92 ER 5356. For plate, pipe tube, forgings and cast alloys with up to 5% magnesium content and for welding dissimilar aluminium grades.

Al-Mg 5%

Cast Iron Electrodes S-NFC

A Graphite coated Iron-Nickel alloy electrode for high strength jointing of cast iron and cold welding of cast iron, it deposits 95%Ni + 2%Fe weld metal.
Can be used for repairing broken cast iron, joining of cast iron to steel and building up worn parts.
Meets the following standards:
AWS A 5.15 E Ni-C1
Din 8573 E Ni BG 11

3.2mm

Recommended Amperage: 100A

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.

0.8% Zirconiated White Tungsten Electrodes

Ideal for high precision, exceptional quality AC welding on aluminium alloys as it retains a balled tip and has a high resistance to contamination. The current carrying capability is equal or greater than that of thoriated tungsten. Non-radioactive. Not suitable for DC welding.

Kennedy 3.2mm 0.8% Zirconiated White Tungsten Electrodes

Zirconiated tungsten electrodes (AWS classification EWZr-1) contain a minimum of 99.10% tungsten and .15 to .40% zirconium. A zirconium oxide (zirconia) alloyed tungsten electrode is
preferred for AC welding when the highest quality work is necessary and where even the smallest amounts of weld pool contamination cannot be tolerated. This is accomplished because the zirconium alloyed tungsten produces an extremely stable arc which resists tungsten spitting in the arc. The current carrying capability is equal to or slightly greater than an equal sized cerium, lanthana or thorium alloyed
electrode. Zirconium electrodes are typically used only for
AC welding with a balled end. Not to be used for DC welding.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11
Copper Coated Mild Steel - BS1453 A1

Kennedy Mild Steel Electrodes

Kennedy AWS 6013 mild steel electrodes rutile heavy coated arc welding electrodes, suitable for producing quality welds on mild steel tube, pipes, plate and strip fabrications and sheet metal work.

AWS 6013 Mild Steel Electrodes

Kennedy AWS 6013 mild steel electrodes are:
Medium rutile coated, all positional rods.
Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
Superb finish with self-releasing slag.
N.B. Suitable for AC (50V minimum open circuit) and DC plus/minus.

Kennedy AWS 6013 mild steel electrodes are manufactured to the following standards: AWS 6013. Lloyds certificates: BGK0610002/01, BGK0610002/02 & MATS/THA-1002/12/1.
ABS certificates: BG575520-X3, BG575520-X2, BG575520-X4, BG575520-X5 & BG575520-X6.

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Satinex

Medium rutile coated, all positional rods. For light to medium fabrication work.
Applications: for steel plate and strip including structural steels.
NB suitable for AC (50V minimum open cicuit) and DC+/-

Murex LW1 MIG Wire Reels

Precision layer wound for snag free production. Gas shielded, deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coated, double deoxidised with manganese and silicon with good mechanical properties. For use with CO2 and AR-CO2. For welding mild steel and C-Mn steels. Available in 0.8mm (15kg drum), 1.0mm and 1.2mm (18kg drums). Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1.

LW1 Mig Wire Reel

2% Thoriated Red Tungsten Electrodes

Most commonly used tungsten electrode. Suitable for both AC and DC welding on carbon, stainless steels, nickel, copper and titanium alloys. Preferred for their longevity and ease of use.

Kennedy 1.0mm 2% Thoriated Red Tungsten Electrodes

2% thoriated tungsten electrodes (AWS classification EWTh-2) contain a minimum of 97.30% tungsten and 1.70 to 2.20% thorium. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. It also features a lower level of weld contamination than other electrodes. Unlike pure tungsten, these electrodes are only for specialty type AC welding (thin gauge aluminum or materials less than .060-in.), but they are exceptional for DC electrode negative or straight polarity on carbon and stainless steel, nickel and titanium applications.
During manufacturing, thorium is evenly dispersed throughout the electrode. This evenness allows the electrode to maintain a sharpened edge, the ideal electrode shape for welding thin steel. Sharpening the electrode point, however, should be done with great care. Thorium is radioactive; therefore, you must always follow manufactures warnings, instructions and the MSDS (Material Safety Data Sheet) for its use.

Aluminium Tig/Gas Welding Rods

Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Saffire 18/8/3 Mo - 316L AWS A/SFA 5-9-93. ER316L. EN12072. W19123L.