Autotorch Brazing System

A portable bronze brazing system using only a single cylinder of propane. Automatic piezo-electric ignition plus interchangeable burners.

No 4100 Strong Glass-filled Nylon Handle

Styled for maximum comfort. Incorporates needle valve and piezo-electric ignitor. Takes any of the Autotorch brazing system burners (but not the Autotorch system 2 burners).

High Pressure Gas Hose

Suitable for replacing damaged hose.
4.8mm Bore
1.4m length
Conforms to BS3212: 1991/2/4.8

Extension Tubes

For use between handle and burner for extending the reach. Can also be used in conjunction with multiple burner adaptors Nos. 1122 and 1123.

Sievert Gas Cartridges

To suit Sievert soldering and brazing tools.

Standard Torch Handles

No. 1185 - With comfortable, flat nylon handle strong enough to withstand rough usage. With standard needle valve. No. 1185/01 - As No. 1185 except hose inlet is replaced with 3/8" BSP-LH male union connection. No. 1245 - Designed with robust nylon handle and trigger operated diaphragm valve - pilot flame is quickly obtained by adjusting the cam ring above the trigger; full flame is given by pulling trigger which can be locked in position for continuous burning. No. 1340 - Specially designed with an immensely strong steel spring handle to stand up to the tough conditions of contractors' use. With standard needle valve. No. 1345 Extended Torch Handle Only (not illustrated) - Extra long handle with arm rest for extra comfort. Standard needle valve. Takes any of the standard burners and can be used in conjunction with the multiple burner adaptors Nos. 1122 and 1123. Overall length: 1060mm.

Blowtorch

Frequently used by professionals and Do-It-Yourself. For soft soldering, small brazing, paint stripping and other heating applications.
Burner diameter: 17mm
Pressure: 3bar
Gas consumption: 180g/h
Effect: 2,3kW
Soft soldering max ? 28mm
Brazing max ? 12mm
Length: 250mm
Height (with cartridge): 170mm
Weight (without cartridge): 215g

P2294

Standard Torch Handles

No. 1185 - With comfortable, flat nylon handle strong enough to withstand rough usage. With standard needle valve. No. 1185/01 - As No. 1185 except hose inlet is replaced with 3/8" BSP-LH male union connection. No. 1245 - Designed with robust nylon handle and trigger operated diaphragm valve - pilot flame is quickly obtained by adjusting the cam ring above the trigger; full flame is given by pulling trigger which can be locked in position for continuous burning. No. 1340 - Specially designed with an immensely strong steel spring handle to stand up to the tough conditions of contractors' use. With standard needle valve. No. 1345 Extended Torch Handle Only (not illustrated) - Extra long handle with arm rest for extra comfort. Standard needle valve. Takes any of the standard burners and can be used in conjunction with the multiple burner adaptors Nos. 1122 and 1123. Overall length: 1060mm.

Autotorch System

Automatic push-button, piezo-electric ignition plus nine easy to change burners. Gone are the days of looking for matches; or the irritation of trying to light in windy conditions. To BS EN 731.

Burners

No 2101\t- Very fine needle flame burner for precision work. No 2102 - Fine flame burner for localised heating. No 2103 - Small flame burner for soldering small assemblies. No 2104 - Medium flame burner for heating, plumbing and engineering where a compact well defined flame is required. No 2105\t- General purpose heating and soldering burner with a large well defined flame. No 2106 - More powerful flame for general use. No 2110 - Autotorch fishtail burner. A superb tailor made burner to give quick and efficient paint stripping; also for plastic tile laying, heat shrinking of plastics. No 2120 - Autotorch hot air burner. Gives a very short flame which barely emerges from the end of the burner. This draws in a large amount of air which is heated by the flame. Ideal for paint stripping, and heat shrinking of plastics. No 2121 - Autotorch soft flame burner. Well spread flame for heat shrinking of plastics for cable jointing and other industrial plastics.

GB2070 General Purpose Blowlamp

Iideal for paint stripping and plumbing. Complete with 2175 cartridge and stabilising base.

No.1263 3/8" BSP Two way outlet valve

The No.1263 two way outlet valve from Bullfinch has a 3/8" BSP - LH female union with two 4.8mm hose ends. Needle valves on each outlet. Gives two outlets off a Bijou regulator.