Gas & Tig Welding Rods

Copper coated triple deoxidised mild steel rod for Tig welding pipework etc. Particularly suited to Tig welding (with argon shielding gas) root runs in pipes. Can be used without flux for oxy-acetylene welding. Typical all-weld metal ultimate tensile strength 630N/mm2.

Sifsteel A15 - BS2901 AWS ER:705-2.

Welding Helmet & Respirator

The Origo? Tech 9-13 helmet features comfort headgear, whilst the lightweight shell offers superior face, head, ear & neck protection, which allows for all position welding.
Variable shade ADF uses the latests technology and has proven reliabilty. The ADF is screw retianed and sits in a fully moulded light seal cradle, which also creates a slight convex curve on the front spatter lens for extra security and strength. Fully assembled and ready to use.
The Origo? Air powered respiratory unit has been designed to fit the Origo? Tech welding helmets.
The unit provides clean, filtered air to increase the comfort and safety for the welder.
The Origo? Air is delivered complete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. The unit is supplied with an inteligent charger, which will ensure a prolonged life time of the battery, by reducing the risk of over charging. Also equipped with a low flow alarm, which will give audible signal when the filter is blocked, or the battery is running low.

Origo? Tech & Origo? Air Combination

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Process & Heating Nozzles

Fully compatible with most heavy duty welding shanks and blowpipes -For use with HD shanks and Saffire 5, 4, 3; Citogas HDT200 and use mixer 143758. Up to 766,000 Btu/h can be achieved from 5H when used on 1144/1143 with adaptor.

Available in a choice of:
1217 1H (72-163Btu/h [1000s])
1219 3H (183-361Btu/h [1000s])
1221 5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Disbosable Cartridge

Disposable cartridge with self closing valve, contains a gas mixture of 35% propane and 65% butane. 300ml (175g).

P2203CA

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Electrodes for Stainless Steels

For welding 316 and 316L stainless steels. Available in 2.5 and 3.2mm.

Nicrex E312 Stainless Steel Electrodes

Nicrex E312 electrodes from Murex are highly alloyed stainless steel electrodes of unusual versatility. It deposits a ferritic/austenitic duplex weld metal with about 40% ferrite content.
Applications: the welding of dissimilar steel combinations such as mild or low alloy steel to stainless steel, and the welding of spring steels, nickel steels and other hardenable steels.

Gosystem Burner Nozzles

To supplement the use of GoGas torches and blowlamps, each packed in reusable storage wallets.

Power Torch Fine Flame Burner

For GoSystem Power Torch. Provides a pointed flame for fine work.

Kennedy Tig Torch Accessories

Also compatible with Parweld and Binzel torches.

Standard Collets

10N_ _ To suit WP17/18/26 torches.

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.