Lenses to Suit Helmets & Shields

To protect the user from UV rays and weld spatter. Standard UK size 4,1/4" x 3,1/4".

Heavy Duty Swaged Welding Nozzles

For use with heavy duty shank.

Extension Tubes

For use between handle and burner for extending the reach. Can also be used in conjunction with multiple burner adaptors Nos. 1122 and 1123.

Stainless Steel Filler Rods - 316LSi

Corrosion resistant, chromium-nickel-molybdenum rods for welding of austenitic stainless alloys. The alloy has very good resistance against corrosion in acid and chlorinated environments and also a low carbon content which makes it particularly recommended where there is a risk of intergranular corrosion.
Rod length: 1 metre
Pack weight: 5kg.

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Large View Welding & Grinding Helmet

Slim and lightweight, full face coverage with a viewing area of 98 x 55mm. Grinding mode, suitable for TIG welding at 20amps. Automatic light adjustment from light to dark in 1/25,000th of a second with automatic power on/off, three lightening delay settings with variable sensitivity. Shade control from DIN 9-13 UV/IR protection up to shade DIN 16. Conforms to CE and BS EN 379:BE EN 175: ANSI Z87.1. Battery life expectancy six years.

Lenses to Suit Helmets & Shields

To protect the user from UV rays and weld spatter. Standard UK size 4,1/4" x 3,1/4".

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Oxygen/Propane Welding Hose Sets

Matched pairs of hose - one each for oxygen (blue) and propane (orange). Kink and crush resistant. 8mm for general use. Supplied fully fitted complete with hose check valves.

Kennedy Mig Torch Accessories

Conical and Tapered

Gas Nozzles