Welders' Hoods

Flame retardant 100% cotton fabric for wearing beneath helmets to give maximum protection against flame, weld spatter and grinding sparks and improved operator comfort. With velcro fastening below chin.

Proban 100% Cotton Flame Retardant Welders' Hoods

Disposable Gas Cylinders

Suitable for MIG/MAG Welders. Supplied Separately.

Mig Welders

Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual overide. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Extra Low current performance - Able to deliver a 30A minimum output for welding very thin material easily. Accepts 0.7kg or 5kg spools for maximum portability and economy. Heavy duty case for durability. Can be used for flux (no gas) and Mig/Mag (gas) welding. Four position, stepped voltage regulator allows process selection to be pre-set. Supplied complete with a smooth action, twin roller feed unit, accessories, two large diameter solid wheels and 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. 2 year warranty. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21.

Leopard EMW-150 Dual MIG Welder

Welding capacity: steel wire: 0.6 - 0.8mm, stainless steel wire: 0.8mm, aluminium wire: 0.8 - 1.0mm, flux cored welding wire: 0.8mm 1.2. Maximum reel size: 5kg.Input voltage: 230V, 50/60Hz. Fuse rating: 16A. Phase: 1. Power consumption: 3.7kW max. (1.4kW 60%). Output current range: 30A - 145A (DC). Open circuit voltage: 31V. Dimensions: (L x W x H) 680 x 285x 410mm.
Contents: LeopardTM EMW-150 power supply. 1.8m cable, 10mm2. Earth clamp, 150A. 2m Mig torch, 160A. Flux cored wire coil 0.9mm x 0.2kg. Hand held face shield with 51 x 107mm glass. Scratch brush and slag remover. Instruction manual.

Standard Torch Handles

No. 1185 - With comfortable, flat nylon handle strong enough to withstand rough usage. With standard needle valve. No. 1185/01 - As No. 1185 except hose inlet is replaced with 3/8" BSP-LH male union connection. No. 1245 - Designed with robust nylon handle and trigger operated diaphragm valve - pilot flame is quickly obtained by adjusting the cam ring above the trigger; full flame is given by pulling trigger which can be locked in position for continuous burning. No. 1340 - Specially designed with an immensely strong steel spring handle to stand up to the tough conditions of contractors' use. With standard needle valve. No. 1345 Extended Torch Handle Only (not illustrated) - Extra long handle with arm rest for extra comfort. Standard needle valve. Takes any of the standard burners and can be used in conjunction with the multiple burner adaptors Nos. 1122 and 1123. Overall length: 1060mm.

Kennedy Tig Torch Bodies

Kennedy Tig torch bodies - made from tough ABS plastic with a silicone rubber head for greater heat resistance and durability.

WP18 Standard Torch Body Only

Kennedy Tig Torch Accessories

Fully compatible with most brands of Tig torches.

Standard Collet Bodies

10N_ _ To suit WP17/18/26 torches.

Disposable Gas Cylinders

Suitable for MIG/MAG Welders. Supplied Separately.

Lightweight Welding & Cutting Kit

A lightweight cutting & welding kit suitable for the DIY user and the professional gas welding market.

Contents:
Lightweight welding & cutting shank.
Lightweight welding mixer.
Lightweight cutting attachment.
Lightweight swaged welding nozzles.
AFNM Nozzles.
AFN Nozzle.
Nozzle cleaners.
Single stage 2 gauge 10bar/150psi oxygen regulator.
Single stage 2 gauge 1.5bar/22.5psi acetylene regulator.
Oxygen thermal in-line flashback arrestor.
Fuel gas thermal in-line flashback arrestor.
Cup type spark lighter.
Drop forged combination spanner.
Cup goggle 2” round shade 5 - EN166 & EN175.
Oxygen/acetylene hose set 6mm x 5m 3/8”x 1/4” HSCV.
Grey plastic carry case.

040952

Curtain Rings

To suit welders' curtain frames.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.