Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Heavy Duty Swaged Welding Nozzles

For use with heavy duty shank.

Parweld Mig Torch Accessories

Also compatible with Binzel Torches.

B1527-09 Contact Tip

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Kennedy MIG Welding Torches

Kennedy Mig/Mag air cooled welding torches are fitted with EURO connectors, have insulated gas nozzles for use with mixed gases and are supplied with a supple four metre cable with a sprung guide into the handle to ensure smooth wire feed without snagging. These tried and trusted quality torches have been used throughout industries such as automotive construction/repair, machine and steel constructions etc.

Features of Kennedy Mig/Mag air cooled welding torches:
Optimum air cooling torch cooling for high endurance.
Ergonomically designed handle style for improved comfort in every position and over extended periods of use.
Light and highly flexible cable assembly, reduces user fatigue during the weld cycle.
Robust construction for durability and extended torch life.

MTE364 Mig/Mag Welding Torch Air Cooled

Fitted with EURO connectors, with insulated gas nozzles for use with mixed gases and a 4m supple, lightweight cable to improve productivity.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Kennedy Mig Torch Accessories

Conical and Tapered

Gas Nozzles

Murex Saffire No.5 Welding, Cutting & Heating Set

Contents: Saffire 5 shank. Acetylene welding mixer. 6 swaged welding nozzles (sizes 2, 5, 7, 10, 13 & 25). Cutting attachment, 2 ANM cutting nozzles (sizes 3/64", 1/16"), AHT 25 heating neck and tip. '0' rings. Spark lighter with 9 flints. Nozzle cleaners. Carrying case. Welding capacity up to 8mm. Cutting capacity up to 75mm.

Saffire No.5 Welding, Cutting & Heating Set

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.