Kennedy Tig Torch Accessories

Also compatible with Parweld and Binzel torches.

Standard Collets

10N_ _ To suit WP17/18/26 torches.

Kennedy Cup Gasket (18CG)

To suit WP17/18/26. N.B. Cup gasket illustrated in white, between gun and ceramic cup (available separately).

Kennedy Gas Lens Ceramics

54N_ _ To suit WP17/18/26 torches.

Reusable Lugs

With arc cable.

Oerlikon DC Inverter Miniarc 4.0i

230V single phase DC inverter for welding steels, stainless steels with rutile, basic and special stick electrodes up to 4.0mm diameter. Output current of 150amps 25% duty cycle. The Miniarc 4.0i is a highly portable machine weighing 3.8kg providing an amperage range of 2 - 150A capable of using electrodes in the range 1.6 - 4.0mm. Operating features include: 'arc force' function to provide a stable arc condition, integral 'hot start' for easy striking and 'antistick' device to eliminate short circuiting of the electrode.

IP23 protection suitable for outdoor use.
European Standards: EN 60974.1/EN 60974.10.
30V single phase DC Inverter.
Fully portable.
1.6mm - 4.0mm electrode capacity.
"Hot Start" for easy striking.
Welds steels, stainless steels with rutile, basic and special stick electrodes.
Effective primary consumption: 16A.
Maximum primary consumption: 31A.
No load voltage: 85V.
Current range: 5A - 150A.
Duty cycle 40C: 100% - 100A, 60% - 120A, 25% - 150A.
Protection class: IP 23.
Insulation class: H.

Kennedy Standard Ceramic Cup 10N__

10N_ _ To suit WP17/18/26 torches.

Copper Cable

Black PVC, single insulated, single core, high flexibility cable.



Supplied to any length in multiples of 1m.

Kennedy Tig Torches

Whether water or air cooled, all Kennedy Tig torches are lightweight and durable. They come supplied with a 12.5ft (3.8m) cable, and silicon rubber rigid or flexible head mouldings for greater heat resistance.

Standard Rigid Head Tig Torch 350DC/250AC - Water Cooled

Dinse Type Cable Plugs & Sockets

With positive locking connection, to prevent accidental disconnection and good external insulation to prevent water penetrating the joint. Dinse compatible panel sockets and machine/surface mounted plugs & sockets also available.

Twist Grip Short Stub Electrode Holders

Reduce fatigue and increase safety. All of the electrode is available for use and the angle allows the hand to remain away from the weld pool. The handle applies torque to the electrode clamp in the head.