Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Supercito 7010S ('Low Hydrogen')

Basic coated, all positional rods. Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensates for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking.
N.B. Suitable for AC (70V minimum open circuit) and DC. Optimum rooting operability is obtained using DC-.

SIP® Hi-Tech Ideal MIG/ARC Inverter Welders

Dual welding feature MIG/ARC for maximum versatility, very high duty cycle, burn back delay, heavy-duty all-metal four roller wire feed, voltmeter and ammeter, integrated large bottle carrier, latching system for 2 touch/4 touch control and inching button. Includes MB24 BINZEL 3M Euro connector MIG torch, accessories and gas regulator. Wheel mounted for optimum manoeuvrability. 2 year warranty.

Hi-Tech Ideal 304 MIG/ARC Inverter Welder - 3 Phase

05167
Specifications:
Supply: 1 Phase 400v (12amp).

MIG:
Welding current: 50-250amps.
Output @ 60% duty cycle: 250amps.
Wire size: 0.8-1.0mm.
Approx. weld thickness range: 1.4-10mm.

ARC:
Welding current: 50-220amps.
Output @ 60% duty cycle: 220amps.
Electrode size: 1.6-5mm.
Approx. weld thickness range: 1.4-10mm.
Weight: 46kg.

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Process & Heating Nozzles

For use with heavy duty shank and welding nozzles.

SIP Hi-Tech ARC Inverter Welders

With anti-stick circuit to ensure a stable arc whilst maintaining optimised welding parameters. Ideal for a wide range of applications, including fabrication, general and auto repairs, agricultural repairs and on-site welding. Superb build quality and extremely easy to use, but with an exceptionally high duty cycle. These models are complete with electrode holder, 3m cable and 3m earth lead. They are also covered by 2 year warranty. All of these models are generator friendly.

Weldmate P174 ARC Inverter Welder

05150
230V (13amp) supply.
140amp @ 60% duty cycle.
10 - 140amp current range.
1.6 - 3.25mm rod diameter.
Complete with carry case.
Weight: 8.4kg.

Stainless Steel Pickling Paste

For the treatment of corrosion on stainless steel and nickel alloys prior to welding. Brush not supplied.

Binzel MIG Torch Accessories

Also compatible with Parweld Torches.

Liners

PVC coated for use with steel wire. Colour coded to indicate wire size: 0.6 - 0.9mm Blue, 1.0 - 1.2mm Red.

Oxygen/Propane Welding Hose Sets

Matched pairs of hose - one each for oxygen (blue) and propane (orange). Kink and crush resistant. 8mm for general use. Supplied fully fitted complete with hose check valves.

Parweld Tweco Style MIG Accessories

to suit 54A: E250/E350, PA3, PA4. 55SW: PA5

Gas Diffusers