Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. Including 1144, 1143, 2010, Saffire 5, 4, 3, NM250, NM400, Citogas HDT200, NMC200. Size 13 suitable for Saffire 4 and 3 only.

Available in 13mm (126809) and 19mm (126810).

A-GNM Gouging Nozzles

PVC Welding Curtains

Standard sized curtains provided with 50mm welded seam all around and with snap-fasteners on both sides for joining to obtain total desired width. Supplied with reinforced holes in the upper edge and steel suspension rings. All standard curtains are made of pliable self-extinguishing PVC material with flash point
320 - 390C. Total width of curtains are 10% longer than total required screening length to compensate for folding. Available in dark green, red/orange and bronze transparent colours. Complying with EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Oxygen/Acetylene Cutting Kit

An oxygen & acetylene cutting kit capable of cutting up to 300mm (12").

Contents:
18” - 90º nozzle mix cutting blowpipe.
Single stage 10bar/150psi oxygen plugged regulator.
Single stage 1.5bar/22.5psi acetylene plugged regulator.
Oxygen thermal in-line flashback arrestor.
Fuel gas thermal in-line flashback arrestor.
Anm short nozzles.
Nozzle cleaners.
Cup type spark lighter.
Drop forged combination spanner.
Cup goggle 2" round shade 5 - EN166 & EN175.
Red plastic carry case.
*Requires separate hose set.

040950

PNM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

Binzel Mig Torch Accessories

003.0013 NOZZLE SPRING MB25

Heavy Duty Swaged Welding Nozzles

For use with heavy duty shank.

Type III/HD Welding & Cutting Kit

A general purpose cutting & welding kit capable of cutting up to 150mm (6”) and welding 30mm (1,1/4").

Contents:
Type III/HD Welding, cutting & heating shank.
Type III/HD Welding & heating mixer.
Type III/HD Cutting attachment.
Single stage 10bar/150psi oxygen plugged regulator.
Single stage 1.5bar/22.5psi acetylene plugged regulator.
Oxygen thermal in-line flashback arrestor.
Fuel gas thermal in-line flashback arrestor.
Type III/HD swaged welding nozzles
ANM Short nozzles.
Nozzle cleaners.
Cup type spark lighter.
Drop forged combination spanner.
Cup goggle 2" round shade 5 - EN166 & EN175.
Oxygen/acetylene hose set 6mmx 5m 3/8”x 3/8” HSCV.
Blue plastic carry case.

040949

Cemont BluMig Mig Welders

A range of compact Mig Welders for your choice of applications

BluMig 241C Professional Compact Mig Welder (Replaces Compact 241M).

Professional compact Mig welder with heavy duty four roll feed system with auto adjusting wire speed, slope up and burnback control, welding timer, fan cooling and thermal
protection.
IP22 Class protection.
240V single phase input.
20A fuse rating.
Power input: 8.2kW
Duty cycle: 240A 35%
Welding current range: 40 - 240 amps.
Weight: 52.0kg.
Dimensions:500 x 870 x 950mm.

CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 403S Professional Separate MIG/MAG Welder

Large robust casing.
Welding current range: 35-400amps.
30 welding steps.
Wire sizes: 0.6-1.2mm.
Dimensions: 500 x 1180 x 950mm.
Weight: 108kg.
4m or 10m wire feed interconnector link options.