Kennedy Tig Torches

Whether water or air cooled, all Kennedy Tig torches are lightweight and durable. They come supplied with a 12.5ft (3.8m) cable, and silicon rubber rigid or flexible head mouldings for greater heat resistance.

Flexible Tig Torch 200DC/160AC - Air Cooled

Kennedy TIG Inverter Welder

Kennedy inverter based welding power sources, are the ideal entry-level package for either stick or Tig welding. They are packed with features: arc force, hot start and anti-stick as well as thermostatic, over-voltage, under-voltage and over-current protection. These lightweight, portable inverter welding units from Kennedy offer excellent performance from a standard 16A supply. Each unit is supplied in a durable carry case complete with cables, earth clamp, electrode clamp and a wire brush.

Jaguar Dual Voltage Inverter 130Amp MMA Welder

The Kennedy Jaguar MMA inverter welder is ideal for use with rutile, basic, stainless steel or cast iron.
MMA electrode welding uses 1.6 - 3.2mm rods including Tig-DC scratch.
Hot start for easy starting. Arc force for quality welds.
Anti-stick reducing electrode sticking.
Fan cooled.
Auto-sensing dual voltage 110/240V.
Dimensions (H x W x D): 380 x 425 x 180mm.
Weight: 7.9kg.

Oerlikon AC Transformer ROKCY

Handy and fully portable AC transformer available in three versions and offers very stable ADC welding characteristics ideal for small workshops, maintenance, agricultural and repair applications. Suitable for both 230V and 400V supply, the ROKCY is capable of depositing mild steel, stainless steel and hardfacing electrodes in the range 1.6 - 5.0mm depending on model.

Fully portable.
Suitable for 230V and 400V supply.
Up to 215A current.
Deposits mildsteel, stainless steel and hardfacing electrodes.
Optional ROKCY 'Ready to Weld' kit, suits all light industrial and fabrication applications.
Kit contains electrode holder and earth return assemblies.

Kennedy Standard Ceramic Cup 10N__

10N_ _ To suit WP17/18/26 torches.

Cold Front Compound

Amazing chemical heat sink that stops heat cold! Odourless and non-toxic - causes no fumes. Won't harm skin or stain surface where applied, will not melt or run when heated. Residue washes off in plain water. Protects glass, rubber, paint, vinyl tops and trim. Prevents buckling when welding, brazing or soldering sheet metal. Save time - prevent the heat in the work from bleeding away. Make repairs without disassembly normally required.

Copper Cable

Black PVC, single insulated, single core, high flexibility cable.



Supplied to any length in multiples of 1m.

Sharp 10KT Plasma Cutter

Sharp 10KT Plasma Cutter
Portable plasma cutter with integrated compressor for manual plasma cutting.
Specification:
Cutting capacity (on steel):
clean 8mm, max 10mm.
Input voltage single phase: 230V.
Primary power
consumption: 11.5A
Duty cycle:
(10 minutes at 40C)
20 A at 60%
Protection class: IP23.
Dimensions:
470 x 205 x 370mm.
Weight: 16kg.
Supplied complete with:
Earth cable, CPT 800
torch and safety
instructions.

Plasma Cutter & Torch

Heavy duty three phase compressed air plasma cutting machines, for general-purpose use. These machines are ideal for high quality cutting of most conductive materials. A single switch allows for simple power control. Features include, torch safety circuit, and 6m cutting torch.

Sharp 40MC

Three-phase power supply 400V
Input power: 27.7kVA - 18.4kW
Max input current: 70A/40A
Effective input current: 50A/28A
Compressed air supply: 220l/min - 5.5 bars
Current range: 30 - 120A
Duty cycle at 40C: at 40% 120A, at 80% 85A, at 100% 50A
Cutting capacity (for steel): contact 8mm, quality 35mm, severance 40mm
Protection class: IP 23
Dimensions: 500 x 855 x 705mm
Weight: 125kg

Cemont Plasma Cutters

The SHARP 10 is a plasma cutter using inverter technology that ensures an excellent regulation of the cutting current, which increases the cutting quality. The digital display ensures better adjustment/control and optimal reading of the cutting parameters, whilst in use. Capable of contact cutting which increases the cutting quality and reduces fume emissions. Easy to transport weighing in at only 8Kg.

SHARP 10 Plasma Cutter

Specification:
Cutting capacity (on carbon steel)
in quality 6mm
in separation 10mm
Input voltage single-phase: 230V - 50/60Hz
Effective consumption: 14A
Compressed air consumption: 100 l/min - 4 bars
Welding current: 10 - 30A
Duty cycle at 40C:
at 35% 30A
at 60% 25A
at 100% 20A
Protection class: IP23
Dimensions: 415 x 150 x 310mm
Weight: 8kg

Supplied complete with:
torch, earth lead and sample consumables.

Cemont Plasma Cutters

The Cemont SHARP 22 is a powerful plasma cutting installation based on inverter technology to ensure excellent regulation of the cutting current, this increases the cutting quality and makes it easy to handle. contact cutting increases the cutting quality and reduces the fume emissions. Supplied compete with torch, earth lead and sample consumables.

Cutting capacity (on steel)
in quality: 20mm
in separation: 24mm

SHARP 22 Plasma Cutter

Specification:
Input voltage three phase: 400V - 50/60Hz
Welding current: 10 - 65A
Duty cycle:
65A at 40% at 40C
50A at 100% at 40C
65A at 100% at 25C
Protection class: IP23
Dimensions: 435 x 235 x 380mm
Weight: 25kg