3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

Surface Conditioning Discs

Reinforced Scotch-Brite web designed for cleaning and finishing on all metals. Leaves a burr-free surface for painting and coating for removal of light rust, oxides and coatings.
Maximum rpm.25mm Discs = 25000rpm.
50mm Discs = 23000rpm.
75mm Discs = 18000rpm.

3M Scotch-Brite? Multi-Flex Sheets

These sheets provide a cost effective alternative to conventional cleaning and finishing products, such as wire wool, wire brushes, scrapers, blades and solvents. Pre-cut sheets on a roll are packed in a convienient centre pull dispenser pack.

3M Scotch-Brite? Clean & Finish Rolls

A Scotch-Brite roll designed for light cleaning, finishing and deburring operations. Available in very fine grades for even finer finishes. The roll can be easily torn to convenient lengths. Available in 10M rolls in a choice of 100mm, 125 and 150mm widths.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

361F Cloth Discs

Tough resin bonded aluminium oxide disc for grinding and stock removal. Applications such as weld grinding and finishing.
Maximum rpm. 25mm Discs = 25000 rpm.
38,50 & 75mm Discs = 20000 rpm.

3M Scotch-Brite? Surface Conditioning Belts

For removing grinding marks and scratches leaving a greatly improved surface finish.

Hook and Loop Backed

For use with a regular (sanding disc) flexible backing pad.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Plain (no hole)

Diameter: 150mm.

3M 734 Wet or Dry? Silicon Carbide Paper

Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



10mm Wide x 330mm Long.

3M Air-Powered File Belt Sander

28366
Ideally suited for use with 3M? Abrasive and Scotch-Brite Belts for a variety of metalworking applications. Grind, deburr and blend from contact wheel or platen, finish and polish from slack of belt. Lightweight, durable construction and 0.6HP motor helps provide an excellent power to weight ratio.

Both belt head and handle rotate a full 360 degrees to easily access hard-to-reach areas. Innovative belt cover allows easy access for quick belt changes. 3M Greptile grip gives a comfortable and secure grip. Warm composite housing minimises vibration for less operator fatigue.

3M exhaust system acts to reduce noise levels, clear debris and maintain cool belt running for enhanced results.

The 3M File Belt Sander comes complete with one standard arm 28368), 3M Air Tool Lubricant (20451) and both a steel and rubber drive wheel.

No load speed: 22,000rpm.
Belt size: 13 x 457mm.
Overall length: 370mm.
Weight: 1.30kg.

A full range of optional arms are also available to suit belts from 3mm - 19mm wide and up to 610mm long.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

777F Cloth Discs

High performance disc with ceramic Cubitron abrasive mineral for use on stainless steels.
Maximum rpm. 25mm discs = 25,000rpm.
38, 50 & 75mm discs = 20,000rpm.