Geared Head Drill with Autofeed

OPTI B40 GSM
Geared head with power feed and coolant system 0333-4400 3ph.
Convincing arguments: quality, efficiency and price. Heavy-duty solid cast iron construction. Heavy-duty thick walled cast iron upright provides for smooth running and stability. Automatic gearwheel lubrication via oil pump. High concentricity precision due to stable main spindle hardened and ground. 9 selectable speeds via gear shifting lever at the front of the drill head and two stage driving motor provides for 18 speeds. Heavy-duty solid drilling table, precision ground with intersecting T-slots, heavily ribbed at the underside, height adjustable via rack. Integrated coolant system and coolant tank. Smooth running due to ground gearwheels. Threading (trapping) facility. Lockable main switch with protective motor switch. Machine lighting integrated in drill head. Spindle locking with integrated drill drift for easy tool change. Vertical adjustable chuck guard. Adjustable drill depth stop with millimetre scale. Solid mounting base with ?T? slots, precision ground.

Standard Accessories:
Quick-action drill chuck 3-16mm.
Taper mandrel 4 MT.
Machine light.
Coolant system.

Specifications:
Model: B40 GSM.
Drilling cap steel: 35mm.
Drilling cap cast iron: 45mm.
Threading in steel max: M24.
Threading in cast iron max: M30.
Spindle to column: 350mm.
Distance spindle to table max: 780mm.
Distance spindle to foot max: 1320mm.
Spindle holding fixture: MT 4.
Spindle speeds: 50-1450rpm.
Number of steps: 18
Sleeve travel (quill): 180mm.
Auto spindle sleeve feed: 2 steps/0.1-0.2mm/rev.
Column diameter: 150mm.
Work area of table (L x W) 560 x 560mm.
Work area of foot (L x W) 510 x 500mm.
T-slot size: 18mm.
Motor power: 1.5KW.
Size: (LxWxH): 73 x 56 x 222cms.
Weight: 580kgs.

Vari Turret Milling Machine

ETM-2VS R8 Variable Speed 1-199-200
3 AXIS DRO. Power feed to three axis. Versatile machine for drilling - milling and boring operations. Heavy-duty and sturdy machine is made of meehanite casting of generous proportion. Rigid machine is rated for continuous use and will give you longer life expectancy. Accurate engineering tolerances have been met by highly skilled engineers during manufacture. 3HP motor allows you to take large cuts during your production runs. R8 spindle allows you to use a large selection of standard tooling. Automatic stop is to up/down feed at the end of the pre-set travel. Angular positioning to left/right through worm and gear for ease. Reversible switch allows you to run spindle clock and counter clock wise. Centralised one-shot lubrication ensures lubrication to all parts otherwise inaccessible. Metric dials with DRO allow you to work in either Inch or Metric calibrations. Hardened slide ways gives the machine much longer production life. Quill feed at three rates of feed give you the option to select the correct feed to quill to suit your individual production requirements. Servo type variable longitudinal cross and vertical feed and rapid. Electrically interlocked spindle guard conforms to the latest CE regulations and Health and Safety Standards.

Standard accessories:
Power feed to quill - three rates. Servo type longitudinal, cross and vertical feed and rapid.
One shot lubrication.
Coolant system.
Electrically interlocked spindle guard.
Low volt machine light.

Specifications:
Table size: 228 x 1245mm.
Table travel (long): 838mm.
Saddle travel (cross): 300mm.
Knee travel (vertical): 400mm.
Quill travel: 127mm.
Ram travel: 315mm.
Spindle motor: 2.2KW (3HP).
Spindle taper: R8.
Quill power feed: 0.04, 0.08, 0.15mm/rev.
Spindle speeds: 70 - 4200 variable speed.
Overall length: 1700mm.
Overall width: 1600mm.
Overall height: 2130mm.
Spindle to table: min. 0mm, max. 415mm.
Spindle to column: min 170mm, max 485mm.
Weight: 100kg.

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV60 60? Throat 1-631-300

Cutting blade to column: 600mm.
Capacity max. work height: 300mm.
Table size: 600x500mm.
Table extension: 220x500mm.
Table inclination (4 ways): 15.
Blade length: 3970mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW.
Weight: 700kgs.

Geared Drive Bandsaws

Convincing arguments: quality, efficiency and price. User-friendly safety switch according to IP54 with under voltage release and protective motor switch. Three blade speeds via gear shifting mechanism. Robust cast iron design. Lowering using hydraulic system with continuous adjustment. Coolant system supplied as standard. Ball bearing 5 point blade guide. Quick action vice. Automatic limit stop. Chip brush.

Standard Accessories:
Bi-metal blade.
Hydraulic counter pressure cylinder.
Machine sub structure.
Material limit stop.
Quick action vice.
Coolant equipment.

Models S181G: 0330-0176 240V 1PH / 0330-0182 415V 3PH

Specifications:
Maximum capacity details:
Cutting range at 0 (Round): 180mm.
Cutting range at 0 (Square): 180 x 240mm / 65 x 300mm.
Cutting range at 45 (Round): 110mm.
Cutting range at 45 (Square): 170 x 110mm.
Blade speed: 39/66/82 m/min.
Blade size: 2362 x 19mm.
Dimensions: 1275 x 450 x 1100mm.
Weight: 130kg.
Motor power: 750w.

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV100 100? Throat 1-631-400

Cutting blade to column: 1000mm.
Capacity max. work height: 300mm.
Table size: 600x500mm.
Table extension: 450x500mm.
Table inclination (4 ways): 15.
Blade length: 4540mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW.
Weight: 800kgs.

Model D420 x 1500 420mm Swing x 1500mmDBC 3ph 0340-1165

Induction hardened and precision ground heavily ribbed prismatic bed. Substructure and lathe bed made from a single block of Meehanite cast iron. Camlock spindle nose D1-6. Oil-quenched hardened work spindle bedded in two readjustable precision taper roller bearings. Guaranteed concentricity precision of the spindle nose 0.015mm. Smooth running work spindle gearwheels hardened and precision ground. Leadscrew and feed shaft drive easily switchable via oil quenched feed gear. Adjustable safety coupling of the feed shaft. The tailstock may be shifted plus/minus for taper turning. Right - left - hand rotation can be switched with the help of the indexing spindle. Emergency stop mushroom switch, lockable main switch. Removable gap bed. Adjustable dial of the threading gauge. Mechanical foot spindle brake. Manufactured to DIN 8606 (toolmakers precision).

Standard accessories:
200mm 3 jaw chuck, 250mm 4 jaw chuck, 350mm face plate, steady rest, follow rest, coolant system, rear splash guard, spindle brake, 2-step drive motor, electrically interlocked chuck guard, turret limit stop with fine adjustment acting as end stop on lathe saddle, machine lamp, threading gauge, operating tools.

Specifications:
Between centres: 1500mm.
Centre height: 210mm.
Max.turning diameter: 420mm.
Max turning diameter over saddle: 255mm.
Max turning diameter over gap: 590mm.
Bed width: 250mm.
Spindle hole: 52mm.
Spindle taper: 6MT.
Tailstock taper: 4MT.
Spindle: D1-6.
No of spindle speeds: 16.
Spindle speeds: 45-1800rpm.
Longitudinal feeds: 0.05-1.7mm/rev.
Cross feeds: 0.025-0.85mm/rev.
Pitch metric (39): 0.2-14mm.
Pitch inch (45): 2-72 TPI
Modular thread (18): 0.3-3.5 MP
Trapezoid thread (21): 8-44 DP.
Top slide travel: 140mm.
Cross slide travel: 230mm.
Sleeve travel: 120mm.
Max. Tool shank: 20mm.
Main motor power: 4.5kW.
Coolant pump: 0.1kW.
Size (LxWxH): 245x91x135cms.
Weight: 1950kg.

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV40 16? Throat 1-631-100

Cutting blade to column: 410mm.
Capacity max. work height: 300mm.
Table size: 600x500mm.
Table inclination (4 ways): 15.
Blade length: 3350mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW
Weight: 440kgs

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV50 20? Throat 1-631-200

Cutting blade to column: 520mm.
Capacity max. work height: 310mm.
Table size: 600x500mm.
Table inclination (4 ways): 15.
Blade length: 3880mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW.
Weight: 500kgs.

Excel Heavy-Duty Bandsaw

Micro alignment of blade through ball bearings. Dovetail slide with take up gib. Rapid approach vice. Adjustable hydraulic feed. Automatic cut off. Variable Speed: No belt change. No time wasting. Speeds up production.

Standard Accessories:
Coolant pump & accessories.
Instruction manual.

Optional Accessories:
Single roller stand 1-625-994 MSR4 4 Roller adj. stand 0335-7610.

Specifications:
Maximum capacity:
@ 90 - round 250mm, square 250 x 250mm, rectangular (H x W): 250 x 415mm.
@ 45 - round 190mm, square 190 x 190mm, rectangular (H x W): 250 x 190mm.
Vice capacity: 450mm.
Blade size: 3300 x 27 x 0.9mm.
Blade speed - stepless: 25-75m/min.
Mitre cut: 45.
Motor: 2hp.
Weight: 325kg.
Dimensions (L x W x H): 1750 x 575 x 1120mm.

Geared Drive Bandsaws

Convincing arguments: quality, efficiency and price. User-friendly safety switch according to IP54 with under voltage release and protective motor switch. Three blade speeds via gear shifting mechanism. Robust cast iron design. Lowering using hydraulic system with continuous adjustment. Coolant system supplied as standard. Ball bearing 5 point blade guide. Quick action vice. Automatic limit stop. Chip brush.

Standard Accessories:
Bi-metal blade.
Hydraulic counter pressure cylinder.
Machine sub structure.
Material limit stop.
Quick action vice.
Coolant equipment.

Models S181G: 0330-0176 240V 1PH / 0330-0182 415V 3PH

Specifications:
Maximum capacity details:
Cutting range at 0 (Round): 180mm.
Cutting range at 0 (Square): 180 x 240mm / 65 x 300mm.
Cutting range at 45 (Round): 110mm.
Cutting range at 45 (Square): 170 x 110mm.
Blade speed: 39/66/82 m/min.
Blade size: 2362 x 19mm.
Dimensions: 1275 x 450 x 1100mm.
Weight: 130kg.
Motor power: 750w.